Palmer BRIDGE 4A handleiding
Handleiding
Je bekijkt pagina 7 van 68
7
USER MANUAL
EN
PACKAGING CONTENT
Remove the product from the packaging and remove all packaging material.
Please check the completeness and integrity of the delivery and notify your distribution partner immediately after
purchase if the delivery is not complete or if it is damaged.
The packaging content includes:
▶ 1 x BRIDGE 4A four-channel active DI box
▶ 1 x power supply unit
▶ Product data sheet
INTRODUCTION
The Palmer BRIDGE 4A has 4 independent channels, which are technically identical. It is a professional tool
for studio and stage, which converts an unbalanced audio signal into a balanced audio signal without distortion.
The internal transformer offers excellent dynamic range and outstanding overload stability. The DI box is used
as a connecting link to connect string instruments with pickups, such as electric acoustic guitars, electric guitars
and electric basses, instruments with line outputs, such as keyboards, as well as loudspeaker outputs from guitar
amplifiers to balanced inputs of a mixer or audio interface. In addition, the DI box allows for interference-free
transmission of audio signals over long cable runs.
WARNING: Power amplifiers must not be operated in bridge mode when connected to the DI box.
WARNING: If an amplifier is connected to the DI box, the ground connection between input and output
must be disconnected (switch no. 4 in position LIFT (not pressed)).
WARNING: The output power of a connected amplifier must not exceed 120 W at 8 ohms!
ATTENTION: When using a tube amplifier: There is no load resistor in the DI box circuit! To prevent
damage to the amplifier, an appropriate guitar speaker or a suitable load resistor must be connected
to the THRU jack using a speaker cable before switching on the amplifier!
Bekijk gratis de handleiding van Palmer BRIDGE 4A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Palmer |
| Model | BRIDGE 4A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10631 MB |
