PAC SRK-RAM13HX handleiding
Handleiding
Je bekijkt pagina 15 van 18
SRK-RAM13HX
Radio Replacement Kit
for 2013-2018 RAM Trucks
and 2019-2024 RAM Classic
Stinger HEIGH10
© 2025 Stinger. All rights reserved. PAC is a Power Brand of Stinger Solutions.
PAC-Audio.com / StingerSolutions.com
Pacific Accessory Corporation
Page 15
Rev: V1
Date: 020725
®
Section 5: Radio Unit Installation
Using the long zip tie from the
SRK-RAM13HX hardware, mount
the RadioPRO Replacement
Interface Module (CH4A-SRK)
to the metal bar at the rear of the
radio cavity.
Part One: Harness and Cabling Connections
Connect the 52-pin dock-and-lock
connector of the Main Wiring
Harness to the OEM radio
connector in the vehicle.
If installed, connect the 2-pin
External Chime Speaker
connector to the 2-pin connector
labeled “CHIME” on the Main
Wiring Harness.
Section 4: Radio Unit & Display Mounting Preparation (continued)
Part Two: Attaching Side Brackets
With the Radio Module facing up,
loosely attach a Radio Module
Mounting Bracket (CDJBRK1_
BRACKET) using two M5x10
screws from the SRK-RAM13HX
hardware. Slide the bracket as far
down as it will go and tighten the
screws.
Attach the other Radio Module
Mounting Bracket using two
M5x10 screws. Ensure the bracket
is positioned as far down as
possible.
From the HEIGH10 harnesses,
plug in the blue LVDS Display
Video Cable (SE-1101) and 8 Pin
Display Power Harness (SE-
1100) into the Radio Module.
Step 1 Step 2 Step 3
Step 2 Step 3Step 1
Bekijk gratis de handleiding van PAC SRK-RAM13HX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PAC |
| Model | SRK-RAM13HX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18646 MB |
