PAC SRK-RAM13HX handleiding
Handleiding
Je bekijkt pagina 11 van 18
SRK-RAM13HX
Radio Replacement Kit
for 2013-2018 RAM Trucks
and 2019-2024 RAM Classic
Stinger HEIGH10
© 2025 Stinger. All rights reserved. PAC is a Power Brand of Stinger Solutions.
PAC-Audio.com / StingerSolutions.com
Pacific Accessory Corporation
Page 11
Rev: V1
Date: 020725
®
Section 2: In-Vehicle Harness Connections and Preparation (continued)
Part Three: GPS Antenna / AM/FM Antenna Adapter (BAA22)
Step 1 Step 1Step 1
Route the blue GPS Antenna
connector below the metal support
bracket. Bundle and secure the
excess cable in the rear of the
radio opening.
From the SRK-RAM13HX
components, connect the AM/FM
Antenna Adapter (BAA22) to the
white factory antenna connector.
From the HEIGH10 box, position
the magnetic GPS Antenna (SE-
1109) on the metal bar running
across the back of the sub-dash at
the rear of the radio opening.
Part Four: Chime Speaker (Optional)
Note: Installation of the chime speaker is only required in trucks
equipped with Safety Group features (parking sensors).
Using the existing hole, mount
the bracket to the metal brace
using one of the supplied
mounting bolts and wing nuts.
Drill a second hole and install the
other bolt and wing nut.
Reattach the speaker to the
mounting bracket.
Route the chime speaker cable
up to the radio opening leaving
enough slack to connect to the
Main Wiring Harness.
To the right of the steering column,
locate the indicated hole on the metal
brace.
Locate the External Chime Speaker
(RPA-SPK). Remove the knobs from
the chime speaker and separate it
from the mounting bracket.
Step 1 Step 2 Step 3
Step 2 Step 3Step 1
Bekijk gratis de handleiding van PAC SRK-RAM13HX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | PAC |
| Model | SRK-RAM13HX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18646 MB |
