Owon OEL15 handleiding
Handleiding
Je bekijkt pagina 32 van 42
27
(Cstop)" and "discharge time (Tstop)". When any of the three conditions is met,
the discharge stops and the electronic load automatically switches to the OFF
state.
When the discharge test uses only one or two of the conditions as the
termination judgment conditions, the other unused conditions must be set to
"OFF".
Press the On/Off button to turn on the channel. During the test, the main
interface can display the actual current, battery discharge voltage, battery
discharge time, and battery discharged capacity in real time. This test can
reflect the reliability and remaining life of the battery, so it is very necessary to
perform this test before replacing the battery.
If the battery discharge termination conditions are met, after the test is
completed, the load interface pops up a "Battery discharge test completed!"
prompt box, and the user presses the Enter key to exit the prompt box.
Tip: If the cut-off voltage is used as the termination condition, when the
battery voltage is too low (lower than the cut-off voltage), the system
Bekijk gratis de handleiding van Owon OEL15, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Owon |
| Model | OEL15 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6637 MB |
