Owon OEL15 handleiding
Handleiding
Je bekijkt pagina 33 van 42
28
determines that the battery has reached the set value, the machine will
consider the test completed and automatically interrupt the test. If the cut-off
voltage condition is OFF, when the port voltage is detected to be 0V, the
electronic load will report a discharge abnormality, automatically terminate the
discharge, and the machine will shut down.
During the discharge process, if you need to pause or terminate the battery
discharge test, you can select the corresponding option through the On/Off
key in the prompt box that appears on the load interface: Pause Discharge,
Terminate Discharge. After confirming the selection, enter OFF, and the key
indicator will turn off.
If the discharge is terminated, press the On/Off key again to power on,
starting a new round of discharge recording.
To exit the battery test mode, select Programming Mode from the system
menu and change the Battery Mode to General Mode.
Note: To avoid electric shock, please ensure that the battery and electronic
load terminals are properly connected before turning on the channel input.
Bekijk gratis de handleiding van Owon OEL15, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Owon |
| Model | OEL15 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6637 MB |
