Handleiding
Je bekijkt pagina 67 van 93
Menu Operations
61
Refer to “5.2.3CAMERA PROFILE” for the details of the COLOR settings and
versatile color profiles.
2.
User LUT File
Follow these steps to apply USER LUT tool.
If you want to apply a USER LUT tool to current signal displayed on screen, you
should load the USER LUT in monitor settings at first.
First, write the designated LUT file to the monitor.
Operation: Select
camera profile
→
LOAD USER LUT
→
LUT*
item in monitor
settings, thus you can choose a LUT file from U disk, and you can see LUT ID in
the list. Choose one LUT ID, then it will pop up a prompt for reminding you
overwriting operation for LUT file, as shown in Figure 6.1-22, press
Confirm
and
choose the target LUT from U disk, the file should be a LUT file with a file
extension of “.cube”, and specify its storage directory, please don’t cut off the
power during loading.
Figure 6.1-22 Prompt for Overwriting LUT
Figure 6.1-23 Calibration USER LUT Directory
It will prompt file write complete after file loading. Then, you can see the profile
name is on the left side of the current LUT ID in the list. You can load up to 10
USER LUTs into the device, for example as shown in Figure 6.1-24.
Bekijk gratis de handleiding van OSEE MEGA 15S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | OSEE |
| Model | MEGA 15S |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 29289 MB |
