OSEE GoStream Duet handleiding
Handleiding
Je bekijkt pagina 45 van 161

Panel Layout and Device Features
39
and increase its value to move downward.
Take a splicing display of zoom in style for example, move it upward or downward,
the comparison is as shown in Figure 4.1-26:
Figure 4.1-26 Move Splicing Display in Vertical Direction
◼
Crop the Splicing Display
You can change the position and size via the
Super Source
→
mask
field.
First, you should set
Super Source
→
mask1/mask2
→
Enable
to be
On
to allow
the crop operation, then you can set the crop parameters, they are
H Start
,
V
Start
,
H End
and
V End
item.
H Start
and
H End
control the crop part in horizontal direction, it will crop the
leftside or rightside of the combination of
Source1
and
Source2
, meanwhile,
V
Start
and
V End
control the crop part in vertical direction, it will crop the upside or
down side of the combination of
Source1
and
Source
. Decrease the parameters
to reduce the cut part, and increase the parameters to add the cut part.
Take a splicing display of zoom in style for example, increase mask1 parameters,
the changings in the splicing display are as shown in Figure 4.1-27 labeled in red
arrows and dotted rectangle:
Figure 4.1-27 Crop Splicing Display Example
Bekijk gratis de handleiding van OSEE GoStream Duet, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | OSEE |
| Model | GoStream Duet |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 27562 MB |

