Optex SL-650QDP handleiding
Handleiding
Je bekijkt pagina 9 van 20
-9-
2-8
MOUNTING IN THE BEAM TOWER
In accordance with the type of the main unit inside the beam tower, install the detector in the same way as wall mounting or pole mounting.
2
1
When installing the detector without the cover, hold the tamper button with the tamper lock plate on both the transmitter and receiver.
Loosen the screw.
1
Tamper lock plate
Tamper button
Fasten the screw to lock
the tamper button.
3
Rotate the tamper lock plate.
2
< Mounting with the chassis > < Mounting without the chassis >
Caution
The switch selection is not recognized when locking the tamper button.
Release the tamper button before selecting a function using the switch.
After completing the settings, be sure to lock the tamper button to check that all LEDs are
OFF. If the tamper button is not locked, the LEDs are kept ON, which consumes more
battery power.
Monitor jack output become disabled when locking the tamper button.
If you do not close the tamper lock plate, the sensitivity will be reduced as adjustment
mode will not end. Be sure to close the tamper with the tamper lock plate.
Make function settings and optical alignment before mounting the cover.
In case you do this installation, the maximum detection range
shall be half of the original detection range. (This is to prevent
the attenuation of beam by the edge of the cover.)
If possible, avoid installing the transmitter and receiver facing
each other in a slanting direction as shown below.
e.g.) SL-200QDM: 60m/200ft.30m/100ft.
Transmitter Receiver
[ Top view ]
1
2
2-9
INSTALLATION EXAMPLE AT PARTICULAR CASE
Bekijk gratis de handleiding van Optex SL-650QDP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Optex |
| Model | SL-650QDP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3725 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 2400 g |
| Breedte | 79 mm |
| Diepte | 96 mm |
| Hoogte | 448 mm |
