Handleiding
Je bekijkt pagina 12 van 32
12 User Manual Refrigerator
Installing Your Refrigerator
Transportation
• Avoid transporting the refrigerator horizontally or laying it down.
Keep it upright during transportation to prevent damage.
• When moving the refrigerator, refrain from holding onto the door
or handle. Always lift the refrigerator from the bottom to ensure
safe handling.
• Never attempt to move the unit alone. It is essential to have
at least two people to safely lift or move the refrigerator.
This precaution helps prevent injury and ensures the unit
remains intact during transportation.
Positioning Your Refrigerator
• The refrigerator should be positioned on a solid, level surface to
ensure the appliance operates efficiently and doesn't wobble.
• Keep the refrigerator away from damp areas where water is
present. Promptly remove any water or dirt from the surfaces
using a soft cloth to prevent rust and maintain optimal efficiency.
• Keep the fridge away from heat sources like stoves, ovens,
and direct sunlight. Heat can affect the fridge's performance
and energy consumption.
Installation of Power Supply
• Ensure the product is installed in a way that allows easy access
to plug or unplug the power cord.
• Insert the product’s plug into a dedicated socket to prevent
accidental power disconnection. Avoid plugging other
appliances into this socket, and do not use extension cords or
multiport adapters, as their combined weight may cause them
to fall from the wall.
• Refer to the product’s nameplate to ensure it meets the
necessary power supply requirements.
• The product must be properly grounded for safety.
Your Installer Will Require:
1. Allen key (M3) 5. Tooling plate
2. Electric drill 6. Limit guide piece
3. Tape 7. Milling L-wrench
4. Hexagon nut wrench
Cabinet Inspection:
• Ensure the cabinet dimensions and door panel match the
specifications (refer to the dimension drawing on page 11).
• Verify the position and routing of the power cable (refer to the
dimension drawing on page 11).
• Check that the power socket has a normal power supply.
The socket should be located outside the refrigerator cabinet
and near the cabinet opening for easy access.
• Ensure the ground is level.
NOTE: Make sure all the above requirements are met before
proceeding to the installation.
Unpacking
• During transportation, protective packaging was used to
protect the appliance against any damage. After unpacking,
please dispose of all elements of packaging in a way that
will not cause damage to the environment.
• Remove the packaging box and take off the top foam.
IMPORTANT: The bottom air inlet/outlet hood will be located
within the top foam.
• Remove the protective foam from the sides and inside
the refrigerator.
• Lift the refrigerator with assistance to remove the
foam pad underneath.
• Open the refrigerator door and take out the installation
accessories and other items stored inside.
CAUTION: During unpacking, the packaging materials
(polythene bags, polystyrene pieces, etc.) should be kept out
of reach of children.
Bekijk gratis de handleiding van Omega OIFDF534, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Omega |
| Model | OIFDF534 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3644 MB |
