Handleiding
Je bekijkt pagina 11 van 32
11User ManualDesigned to Enhance Refrigerator
Installing Your Refrigerator
Installation of Refrigerator
In order to ensure that the built-in appliance functions properly,
the cabinet containing it must be appropriate. The diagram
below gives the dimensions of the cut-out for installation and
required clearances.
• The left and right cabinet doors must have the same width (B),
and the height of the doors is determined by the cabinet design.
• The door panel and cabinet should overlap fully.
• The height of the Base Trim should be between 80–120mm.
If it exceeds this range, it may impact cooling performance.
• The hole for the power cable and water pipe can be drilled on
one or both sides, depending on your setup. The hole diameter
must be equal or larger than 50mm.
• The power socket should be located in an adjacent cabinet
for easy access.
W
H
D
E
F
B
B
A
A
C
G
H
A
W 964 min.
D 580 min.
H 2000 min.
E 100–180
F 10 min.
G 280
H 606 - Base Trim Height
X 4
Inside cavity dimensions (mm)
Ø 50
100mm Base Trim
A = Door Panel Thickness
R = Cabinetry Rounded Corners
Ø 50
A
X X
B 496 (Method 1)
B 494 (Method 2)
C 996 (Method 1)
C 992 (Method 2)
B 496 (Method 1) (R≥7)
B 494 (Method 2) (R≥9)
C 996 (Method 1) (R≥7)
C 992 (Method 2) (R≥9)
If A = 16–22: If A = 23–25:
Installation Method 1 Installation Method 2
R R
Bekijk gratis de handleiding van Omega OIFDF534, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Omega |
| Model | OIFDF534 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3644 MB |
