Olimpia Splendid Sitali SF150 S1 handleiding

Niet gecategoriseerd

Olimpia Splendid

36 pagina's

PDF beschikbaar

Handleiding

SYNCHRONISATIONOFANUMBEROFUNITS

Itispossibletosynchronizedupto10unitscontemporaneously,throughwire(2poletwistedpairtype,max30mlength)sotohave

modeandinversiontimesynchronized.Whentheunitisswitchedonfortheﬁrsttime,therotationdirectionofeachunit(clockwiseor

anti-clockwise)isautomaticallyestablished.Otherfunctionalitieslikespeed,smarthumiditycontrolandboost,continuetobecontrolled

independently on each single unit.

Wiringdiagramasperﬁg.17B.

VENTILATIONSYSTEMDISABLE (not available on the SITALI SF 150 model cod.99431)

Whenunitsareconnectedforsynchronizationasdescrivedabove,it’spossibletoswitchoffallunitsusingtheDISABLEinput(ﬁg.18B).

It’ssufﬁcientto connecta switch(or relayoutput) totheDISABLEinputofJUSTONEunit (ﬁg.19B): whenthe contactis closed

(shortened), all units switch off. The units remain switched off until the contact is reopened, whereupon they resume normal operation.

Maintenancecanbecarriedoutbytheuserasshowninﬁgures52-68.

MAINTENANCE

SPEED LED COLOUR ACOUSTIC SIGNAL

speed 1 single green led short, single

speed 3 double green led short, double

OFF* red led long

*pressthebuttonfor3seconds.

ANOMALY POSSIBLE CAUSE SOLUTION

NoiconshownonthecontrollerLCD

display

Batteriesaredead Change the batteries

Batteriesarenotpresent Check that batteries are in there

Batteriesarewronglypositioned Position the batteries correctly

The icon ashes on the LCD

display

Low batteries Change the batteries

Theunitdoesnotexecutethe

command sent from the remote control

Lack of communication between the unit and the

remote controller

Go closer to the unit, pointing the controller to the

receiver on the left side of the unit

The unit does not operate

There is no voltage Check that the unit is correctly wired to the main supply

Ventilation unit does not couple correctly with the

support base

Check that the coupling is properly done

TheDISABLEinputisclosed OpentheDISABLEinput

Theunitoperatesatthemaximum

speed

TheBoostfunctionalityisactivated,onthedisplay

the icon is shown

Wait until the boost timing ends (15 minutes)

or deactivate the boost function pressing the

button.

Unit speed suddenly increases The smart humidity control is activated

Wait until the smart humidity control phase ends (10

minutes) or deactivate the humidity control function

pressing the button for 5 seconds.

Fixedyellowled Dirtyﬁters

Filtersmaintenance/replacementisneeded:reset

ﬁlteroperationhastobedone

Fixedredled Antifrost protection is activated Wait until the antifrost phase ends (30 minutes)

Fixedblueled Boostisactivated

Wait until the boost timing ends (15 minutes)

or deactivate the boost function pressing the

button.

Flashing blue led Smart humidity control is activated

Wait unitl the humidity control phase ends (10

minutes)

Fixedpurpleled

Ventilation unit does not couple correctly with the

support base

Check that the coupling is properly done

Acoustic signal to disable -

Press the button for 7 seconds: a green led

ashes.

TROUBLE SHOOTING

2014/35/UELowVoltageDirective(LVD)and2014/30/UEElectromagneticCompatibility(EMC),inconformitywiththefollowingstandards:

ElectricalSafetyEN60335-1(2012)+A11+A13;EN60335-2-80(2003)+A1+A2.

ElectromagneticCompatibilityEN55014-1(2017);EN55014-2(2015);EN61000-3-2(2014);EN61000-3-3(2013).

STANDARD CONFORMITY

BACKUPBUTTON

Incasetheremotecontrollergetslostorthebatteriesaredead,speeds1,3andOFFpositioncanbeselectedfromtheonboardtouch

button(C).Theairowdirectionisalwaysalternateandtheoperationmode(eithercomfortorefﬁciency)isthelastselectedfromthe

remote controller.

Bekijk gratis de handleiding van Olimpia Splendid Sitali SF150 S1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.