Olimpia Splendid Bi2 SL SMART S1 handleiding

Niet gecategoriseerd

Olimpia Splendid

164 pagina's

PDF beschikbaar

Handleiding

EN - 45

ENGLISH

Bi2 SL/SLR-SMART S1

N.B. for the horizontal installation carefully note the following precautions:

- make sure that the machine is installed perfectly level or with a slight inclination towards the

condensation discharge;

- insulate carefully the inow and outow pipes up to the machine union to prevent any drops of

condensation outside the same collection bowl;

- insulate the bowl condensation discharge pipe along all of its length.

2.9 - FIXTURE ROTATION

Theoperationsdescribedandtherelativeimagesrefertoamachinewithxturesontheleftonwhichthe

xturesontherightsidemustberotated.

Ifthereisamachineavailablewithrightsidexturesthatrequirerotationtotheleft,thesequenceofthe

operationsisthesame,onlytheimagesareamirrorimage.

Toconnectthemotortothecontrolkit,usethespecialcabling(optional).

2.9.1 - Dismounting panels

- Liftthecover(g.15ref.H)thatprotectsthescrew(g.15ref.L)andunscrewit.

- Movethesidepanelslightlytotherightandliftitout(g.15ref.P).

- Removetheairltersonthelowerside(g.16ref.A);

- Undothescrews(g.16ref.B)thatsecurethefrontpanel(g.16ref.C)andremovebypullingitoutfrom

 thelowerhook(g.16ref.M);

- Removethebatteryupperinsulation(g.16ref.D);

- Unscrewthetopinletconnector(g.17ref.A)

- Unscrewthebottomoutletconnector(g.17ref.B)

- Takeouttheplatewiththeheatingcoil(g.17ref.C).

2.9.2 - Dismantling the heating plate (only for SLR SMART)

- Dismountallthecollectorunits(g.18ref.A)

2.9.3 - Dismounting control panel (if present)

- PositionthesystemmasterswitchtoOFF.

- Removethedoorgivingaccesstothecollectorunits(g.19ref.A)byundoingthexingscrew(g.19

ref. B).

- Dismountthecontrolpanel(g.19ref.C)unscrewingthetwoxingscrews(g.19ref.D)andrelative

electrical box.

- Unplug the connectors of the electrical connections.

- Remove the cables inside the machine and re-insert them from the opposite side.

- Forthemotorconnection,usethespecialcableforrighthandxtures,availableasanaccessory.

- Invertthemountingpositionsofthedoor(g.19ref.A)withthecontrolpanel(g.19ref.C)andremount

them in their respective positions.

- Dismountthecondensationcollectiontray(g.19ref.F)andremountitontheoppositesidewiththerelative

 xingscrews(g.19ref.G).

- RemovethecontrolEandreassembleitfromtheoppositesideintherespectivepositionwiththerelative

 screws

Bekijk gratis de handleiding van Olimpia Splendid Bi2 SL SMART S1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.