Handleiding
Je bekijkt pagina 118 van 438
Changing settings from the operator panel
- 118 -
Item
Factory
default
setting
Description
Panel Setup Near Life Status Enable Set whether or not to display a message
when the image drum or fuser unit is
approaching the end of service life.
Near Life LED Enable Set whether or not to light the ATTENTION
lamp when the image drum, fuser unit or
toner cartridge is approaching the end of
service life.
Paper setup when paper exchange On Set whether or not to display a paper size
confirmation message when the paper
cassette is removed or when paper is
loaded into the MP tray.
This menu is displayed when [AirPrint] is set
to [Disable] by disabling [Bonjour] or [IPP].
Idle Display Toner Gauge Select the information to be displayed on
the standby screen.
Panel Contrast 0 Adjust the display contrast.
Value range: -10 ~ +10
Power Save LED Brightness Bright Set the brightness of the flashing Power
Save LED when the machine is in the sleep
mode.
Buzzer Setup Error Volume Off Set the buzzer volume when an error
occurs.
Print Completion Buzzer Volume Off Set the buzzer volume when the printing
has completed.
Printer Identification Buzzer Volume Low Set the buzzer volume when you use
AirPrint, Mopria, or IPP Everywhere to find
the printer.
Time Setup Date Format dd/mm/yyyy
or
mm/dd/yyyy*
Set the date in the format of dd/mm/yyyy or
mm/dd/yyyy.
Time Zone +0:00 Set the GMT time zone.
Value range: -12:00 ~ +13:00 (in increments
of 15 minutes)
Daylight Saving Off Set the daylight saving (daylight saving
time).
Setting method Manual
Setup
Select how to set the time.
SNTP Server (Primary)
(Blank)
Set the SNTP server used to set the current
date and time. Up to 64 characters can be
used.
It is displayed when [Setting method] is set
to [Auto Setup].
SNTP Server (Secondary) (Blank)
Time Setup - Change the date and time if necessary.
It is displayed when [Setting method] is set
to [Manual Setup].
Power Setup Auto Power Off Auto Config Set the operation of Auto Power Off.
[Auto Config]: Auto Power Off does not work
for network connections (wired/wireless).
[Enable]: Auto Power Off works regardless
of the connection method.
[Disable]: Auto Power Off does not work.
Bekijk gratis de handleiding van Oki B433dn, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oki |
| Model | B433dn |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 73133 MB |
