Handleiding
Je bekijkt pagina 114 van 438
Changing settings from the operator panel
- 114 -
Item
Factory
default
setting
Description
Subnet Mask 255.255.255.
0
Input the subnet mask. It is displayed when
[IP Address Set] is set to [Manual].
Gateway Address 0.0.0.0 Input the gateway address. It is displayed
when [IP Address Set] is set to [Manual].
DHCPv6 Disable Set whether or not to obtain the IPv6
address automatically.
HUB Link Setting
Auto
Set the connection method to the hub.
USB Setup
USB
Enable
Enable/Disable the USB interface.
Speed 480 Mbps Set the maximum baud rate using a USB
interface.
Soft Reset
Disable
Enable/Disable the Soft Reset command.
Serial Number Enable Enable/Disable the USB serial number.
The USB serial number is used to identify
the USB device connected to the PC.
Offline Receive Disable When [Enable] is selected, data can be
received even if the printer is offline.
USB Memory Interface Enable Enable/Disable the USB memory interface.
If the setting value is changed, the setting
will be reflected after the machine is
restarted.
Connected Host Normal Set it to [Specific] in case of timeout when
printing on this machine in sleep mode.
Power consumption in sleep mode is higher
than that in [Normal].
Print Setup
Personality
Auto
Select the operating language of the printer.
Copies 1 Set the number of copies.
The value set in the printer driver takes
priority.
Duplex On Set whether or not to implement duplex
printing.
The value set in the printer driver takes
priority.
Binding Long Edge Specify the binding method for duplex
printing.
The value set in the printer driver takes
priority.
Media Check Enable Set whether or not to check the mismatch
between the paper size of the print data and
that of the paper tray.
A4/Letter Override Yes Set the functions of auto switching of the
printing paper from A4 to Letter when A4
paper runs out and Letter paper is loaded,
or from Letter to A4 when Letter paper runs
out.
Edge to Edge Off Specify it to expand the print margin.
The value set in the printer driver takes
priority.
Resolution 600 dpi Set the resolution.
The value set in the printer driver takes
priority.
Toner Save
Off
Set the toner save level.
Default Orientation Portrait Specify the print orientation. For PostScript,
this setting is disabled.
Bekijk gratis de handleiding van Oki B433dn, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oki |
| Model | B433dn |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 73133 MB |
