Handleiding
Je bekijkt pagina 113 van 438
Changing settings from the operator panel
- 113 -
Item
Factory
default
setting
Description
HTTPS Redirection (Web) Enable Specify whether or not to enable the HTTPS
Redirection (Web) function.
It is displayed when the [TCP/IP] protocol is
set to [Enable].
Telnet Disable Specify whether or not to enable access
using Telnet.
It is displayed when the [TCP/IP] protocol is
set to [Enable].
FTP Disable Specify whether or not to enable access via
FTP.
It is displayed when the [TCP/IP] protocol is
set to [Enable].
IPSec Disable It is displayed only when IPSec is enabled.
It can be changed to Disable only.
It is displayed when the [TCP/IP] protocol is
set to [Enable].
SNMP Enable Specify whether or not to enable access
from SNMP.
It is displayed when the [TCP/IP] protocol is
set to [Enable].
WSD Print Enable Specify whether or not to enable WSD Print.
It is displayed when the [TCP/IP] protocol is
set to [Enable].
Network Scale
Small
Normally, leave it as [Small].
Network Factory Defaults Execute Restores the network menu to its factory
default settings.
Wired (LAN1)
Settings
Wired (LAN1)
Enable
Enable/Disable the wired LAN1.
IP Address Set Auto Set whether to obtain the IPv4 address
automatically or input it manually.
IPv4 Address 192.168.100.
100
Input the IPv4 address manually. It is
displayed when [IP Address Set] is set to
[Manual].
Subnet Mask 255.255.255.
0
Input the subnet mask. It is displayed when
[IP Address Set] is set to [Manual].
Gateway Address 0.0.0.0 Input the gateway address. It is displayed
when [IP Address Set] is set to [Manual].
DHCPv6 Disable Set whether or not to obtain the IPv6
address automatically. Set it to [Disable]
when you do not use the IPv6 address.
Gigabit Network Disable Enable/Disable connection via 1000Base-T.
When it is set to [Disable], 1000base-T
Full/Half duplex connection cannot be
made.
HUB Link Setting
Auto
Set the connection method to the hub.
Wired(LAN2)
Settings
Wired(LAN2) Enable Enable/Disable the extended wired LAN
(LAN2).
It cannot be used simultaneously with a
wireless LAN.
IP Address Set Auto Set whether to obtain the IPv4 address
automatically or input it manually.
IPv4 Address 192,168,102,
100
Input the IPv4 address manually. It is
displayed when [IP Address Set] is set to
[Manual].
Bekijk gratis de handleiding van Oki B433dn, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oki |
| Model | B433dn |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 73133 MB |
