Handleiding
Je bekijkt pagina 115 van 438
Changing settings from the operator panel
- 115 -
Item
Factory
default
setting
Description
Edit Size Cassette
Size
Set the size of the drawing area when the
size is not specified by the paper size edit
command from a PC.
Width 210 mm Set the default paper width for a custom
paper size.
Length 297 mm Set the default paper length for a custom
paper size.
PS Setup L1 Tray Type 1 Set the tray selection number of level 1
operator command of PostScript.
Network Protocol RAW Specify the PS communication protocol for
network connection.
USB Protocol RAW Specify the PS communication protocol for
USB connection.
PDF Paper Size Current Tray
Size
Specify the paper size for direct printing of
PDF files.
PDF Scaling Size 99% Set the reduction ratio when [Scaling Size]
is selected in [Size in PDF file].
PDF Print Mode Quality
priority
Set whether or not to prioritize print quality
or print speed when a PDF file is printed.
PCL Setup
Font Source
Resident
Select the location of the font to be used.
Font Number I0 Select the number of the font to be used.
Value range: I0 - I90 when [Resident] is
set/C1 - C4 when [Resident2] is set
Font Pitch 10.00 CPI Set the PCL font width.
Value range: 0.44 - 99.99 CPI (in
increments of 0.01 CPI)
Font Height 12.00 points Set the PCL font height.
Value range: 4.00 - 999.75 points (in
increments of 0.25 point)
Symbol Set
PC-8
Select the symbol set of PCL.
A4 Print Width 78 columns Set the number of columns until an auto
carriage return on A4 paper.
White Page Skip
Off
Select whether or not to print blank pages.
CR Function CR Set the actions of this machine when
receiving the CR code.
LF Function LF Set the actions of this machine when
receiving the LF code.
Print Margin
Normal
Set the unprintable area of the paper.
Pen Width Adjust On Set whether or not to emphasize fine lines
and make them thicker.
Tray ID#
MPTray
4
Set the value to specify the tray with the
output specification command of PCL.
Value range: 1 - 59
Tray1
1
Tray2
5
Tray3
20
Tray4
21
SIDM Setup SIDM Manual ID# 2 Sets up Pn specified in MANUAL by
MANUAL-1 ID No.FX/PPR Emu in CSF
control command (ESC EM Pn).
SIDM Manual2 ID# 3 Sets up Pn specified in MANUAL by
MANUAL-2 ID No.FX/PPR Emu in CSF
control command (ESC EM Pn).
Bekijk gratis de handleiding van Oki B433dn, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oki |
| Model | B433dn |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 73133 MB |
