Handleiding
Je bekijkt pagina 110 van 438
Changing settings from the operator panel
- 110 -
Item
Factory
default
setting
Description
Clearable Warning OK button Set the timing to clear the recoverable error
display.
Auto Continue Off Set whether or not to automatically restore
this machine when a memory overflow or
tray request occurs.
Manual Timeout 60 seconds Set the waiting time for loading the paper
when you print with [Feed paper individually]
checked in the printer driver.
Value range: Off, 30 seconds, and 60
seconds
Timeout Injob 40 seconds Set the time from loss of the data receipt
(canceled by PostScript) until force-printing.
Value range: Off, 5 seconds, 10 seconds,
20 seconds, 30 seconds, 40 seconds, 50
seconds, 60 seconds, 90 seconds, 120
seconds, 150 seconds, 180 seconds, 210
seconds, 240 seconds, 270 seconds, and
300 seconds
Timeout Local 0 seconds Set the time to keep each port open after
printing. (Except for network)
It can be set from 0 seconds to 300 seconds
in increments of 5 seconds.
Timeout Network 90 seconds Set the time to keep the network port open
after printing.
It can be set from 0 seconds to 300 seconds
in increments of 5 seconds.
Jam Recovery On Set whether to reprint pages not printed due
to a paper jam after the paper jam is
cleared.
When [Off] is selected, the printing process
including pages missed due to the paper
jam will be canceled.
Error Report Off Sets whether to print error reports when an
internal error occurs.
Hex Dump Execute Prints the data received from the PC in
hexadecimal dump. To exit this mode, turn
off the power.
Print Adjust Print Position
Adjust
MPTray
X Adjust
0.00 mm
Adjusts the printing position of each tray.
Tray2/3/4 is displayed when the expansion
tray is mounted.
[X Adjust]: Adjust the position of a whole
print image in the direction that is
perpendicular to the direction paper runs,
that is horizontally.
Value range: ±2.00 mm (in increments of
0.1mm)
[Y Adjust]: Adjust the position of a whole
print image in the direction paper runs, that
is vertically.
Value range: ±2.00 mm (in increments of
0.1mm)
Y Adjust
0.00 mm
Duplex X
Adjust
0.00 mm
Duplex Y
Adjust
0.00 mm
Tray1
X Adjust
0.00 mm
Y Adjust
0.00 mm
Duplex X
Adjust
0.00 mm
Duplex Y
Adjust
0.00 mm
Tray2
X Adjust
0.00 mm
Y Adjust
0.00 mm
Duplex X
Adjust
0.00 mm
Bekijk gratis de handleiding van Oki B433dn, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oki |
| Model | B433dn |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 73133 MB |
