Handleiding
Je bekijkt pagina 109 van 438
Changing settings from the operator panel
- 109 -
Item
Factory
default
setting
Description
Tray4 Config Paper Size A4 Set the size of the paper you want to print
on from Tray 4.
X Dimension 210 mm Set the paper width when you have selected
a custom size for the paper that you want to
print on from Tray 4.
Y Dimension 297 mm Set the paper length when you have
selected a custom size for the paper that
you want to print on from Tray 4.
Media Type Plain paper Set the type of the paper you want to print
on from Tray 4.
Media Weight Medium Set the weight of the paper you want to print
on from Tray 4.
Paper Feed Tray Tray1 Specify the paper tray.
The settings of the printer driver take
priority.
Auto Tray Switch On Set whether or not to use the Auto Tray
Switch function.
The settings of the printer driver take
priority.
Tray Sequence Down Specify the tray sequence for Auto Tray
Selection/Auto Tray Switch.
Duplex Last Page Skip Blank
Page
Set whether or not to print the last 1-sided
page when the duplex printing is done on
odd-numbered pages.
System
Adjust
Power Save Time 1 minute Set the time that will elapse before the
power save mode is entered.
Value range: 1 minute, 2 minutes, 3
minutes, 4 minutes, 5 minutes, 10 minutes,
15 minutes, 30 minutes, and 60 minutes
Sleep Time 1 minute Set the time that will elapse before the sleep
mode is switched from the power save
mode.
Value range: 1 minute, 2 minutes, 3
minutes, 4 minutes, 5 minutes, 10 minutes,
15 minutes, 30 minutes, and 60 minutes
Sleep After Printing Enable Set the machine to enter the sleep mode
immediately after printing. When it is set to
[Enable], the machine enters the sleep
mode as soon as possible after printing to
save energy. Depending on the temperature
and other conditions inside the machine, the
machine may not switch over temporarily.
[Enable]: The machine enters the sleep
mode right after printing.
[Disable]: The machine does not enter the
sleep mode right after printing.
Auto Power Off Time 15 minutes or
4 hours*
Set the time that will elapse before the
power is turned off automatically after the
standby mode is entered.
Value range: 15 minutes, 1 hour, 2 hours, 3
hours, 4 hours, 8 hours, 12 hours, 18 hours,
and 24 hours
Bekijk gratis de handleiding van Oki B433dn, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oki |
| Model | B433dn |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 73133 MB |
