Handleiding
Je bekijkt pagina 111 van 438
Changing settings from the operator panel
- 111 -
Item
Factory
default
setting
Description
Duplex Y
Adjust
0.00 mm [Duplex X Adjust]: At the time of back page
printing of Duplex (when printing the print
side of paper fed from the duplex unit),
adjust the position of the whole print image
in the direction that is perpendicular to the
direction paper runs, that is horizontally.
Value range: ±2.00 mm (in increments of
0.1mm)
[Duplex Y Adjust]: At the time of back page
printing of Duplex (when printing the print
side of paper fed from the duplex unit),
adjust the position of a whole print image in
the direction paper runs, that is vertically.
Value range: ±2.00 mm (in increments of
0.1mm)
Tray3
X Adjust
0.00 mm
Y Adjust
0.00 mm
Duplex X
Adjust
0.00 mm
Duplex Y
Adjust
0.00 mm
Tray4
X Adjust
0.00 mm
Y Adjust
0.00 mm
Duplex X
Adjust
0.00 mm
Duplex Y
Adjust
0.00 mm
Transfer Setting 0 Fine-tune the printing in case of noticeable
blurs etc. on the printing result. Decrease
the value if scattered or snowy printing
occurs in the high-density printing section.
Increase the value if printing is faint.
Adjustable within the range of
±
2.
SMR Setting 0 Correct printing variations due to differences
in temperature and humidity environments,
printing density/printing frequency. Change
the value if there is burr in the image.
Adjustable within the range of ±3.
BG Setting 0 Correct printing variations due to differences
in temperature and humidity environments,
printing density/printing frequency. Change
the value if the underlay is dark. Adjustable
within the range of ±3.
Color Density 0 Set the printing density.
Darken the printing result by adjusting in +
direction, or lighten the printing result by
adjusting in - direction.
Adjustable within the range of ±3.
Drum Cleaning Off Set whether or not to empty the drum before
printing when white streaks appear in the
horizontal direction. When it is set to [On],
the service life of the image drum will be
shortened.
High Humid Mode Off The paper may curl when the paper is
ejected at a high humidity. Set this setting to
[Mode1] or [Mode2] to reduce the curling
effect.
The printing time is longer than the case of
[Off].
The service life of the image drum and fuser
unit will be shortened.
Bekijk gratis de handleiding van Oki B433dn, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Oki |
| Model | B433dn |
| Categorie | Printer |
| Taal | Nederlands |
| Grootte | 73133 MB |
