Nord Organ 3 handleiding
Handleiding
Je bekijkt pagina 17 van 40
4. ORGAN AND BASS MODELS | 17
VX
The left Bass Pedal drawbar controls the level of the Bass Pedal range
while the right drawbar provides a mix of the original soft and hard
VX bass drawbars. The 0 position represents fully soft, and when fully
drawn out the mix consists mostly of the hard drawbar.
The Vx model is monophonic, and always produces a 16’, sub-
fundamental, pitch.
FARF (ALTERNATE SETTING)
The left drawbar of the FARF bass determines the level of the bass
sound, while the right drawbar switches between a soft, filtered sound
and a more brilliant timbre. The Farfisa bass corresponds to a 16’, sub-
fundamental, pitch.
TRK
The TRK setting provides the sound of a commonly used synth bass
module, often added to B3 organs as a modification. The left and right
drawbars represent the 16’ and 8’ components of the bass sound.
TRK ALTERNATE (NO PLUCK)
With the alternate version of the Trk bass, the “pluck” parameter of the
original unit is deactivated, for a smoother note onset.
PIPE
With the PIPE organ Bass Model the left and right drawbars represent
the 16 and 8 foot pedal ranks of a principal pipe organ, respectively.
SOFT (ALTERNATE SETTING)
The SOFT model shares the character of the Soft B3 Organ Model,
having no key click and a softer note onset and release over all. It is
otherwise similar to the B3 bass model, with 16’ on the left and 8’ on
the right drawbar.
USER
The USER option allows for making a custom selection from a range of
preset synth bass sounds, including recreations of well-known, classic
bass synthesizers as well as plucked, resonant or stringy sounds, greatly
expanding the sonic palette of the Nord Organ 3 bass registers.
i The selected sound for the User Bass Model is individual for Panel
and Program mode respectively. Refer to page 13 for more
details on the Panel and Program modes.
PRESET SELECTION (ALTERNATE)
With the USER option selected, pressing ALTERNATE (Shift+Bass
Model selector) displays the list of available synth bass presets. After a
selection has been made, press Exit (Shift) to close the list view.
SUSTAIN
Use the SUSTAIN control to add a sustaining tail to the
selected Bass Model. With Sustain active, at any setting, the
sound of the selected Bass Model is monophonic.
At the 1 position the sustaining tail is relatively short, useful
for softening the key-off of the bass sound and increasing
the legato character of consecutive notes. The 2 setting represents a
medium amount of sustain while the 3 setting allows a played note to
keep ringing for a considerable amount of time after the key has been
released.
l In synthesizer terms this parameter would normally be referred
to as “Release”, as it corresponds to the release phase of a
synthesizer envelope. On the Nord Organ 3 the term “Sustain” is
used as this term has traditionally been used by manufacturers of
organs and organ accessories.
SWELL PEDAL
Swell is a characteristic organ feature, controlled from a continuous
pedal. Swell is not only a volume control – for the B3 it also changes
the character of the sound in a special way. To use Swell control on the
Nord Organ 3, simply plug in a standard expression pedal to the Organ
Swell input on the rear panel and configure the pedal in the Pedal Menu
(see page 17).
An expression pedal connected to the Organ Swell input will control
Swell for all organ models.
Bekijk gratis de handleiding van Nord Organ 3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Organ 3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4761 MB |
