Nord Organ 3 handleiding
Handleiding
Je bekijkt pagina 18 van 40
18 | NORD ORGAN 3 USER MANUAL OS V1.0X
5
ROTARY SPEAKER AND AMP SIM
ROTARY SPEAKER
The Rotary Speaker effect accurately reproduces the sound of the
rotating horn and bass rotor, as well as the characteristics of the built-in
amplifier of the original rotary construction. Use the Rotary Speaker/Amp
Sim selector button to select the Rotary Speaker (all three LEDs being
lit).
l Pressing ROTOR (Shift+selector button) is a handy shortcut into the
Sound menu, with the page containing Rotary Speaker speed and
acceleration settings already selected.
MIC POSITIONS
The five available Microphone Positions correspond to some of the most
common ways of reproducing the sound of the Rotary Speaker, for both
live and studio recording purposes.
Use the MIC POS selector to switch between the available perspectives.
Mic Pos Description
1 - CLOSE
A narrowly spaced pair of mics in a close
position, on the rear side of the cabinet.
2 - WIDE
A widely spaced pair of mics placed at a
medium distance, on the rear side of the
cabinet.
3 - 90°
A pair of mics placed in a 90° configuration, at
one of the front corners of the cabinet.
4 - 180°
A pair of mics placed in a 180° configuration,
one on either side of the cabinet.
5 - XY
A pair of mics in a coincident, X/Y
configuration for full mono compatibility. Placed
at a medium distance on the rear side of the
cabinet.
l The available microphone positions affect the reproduction of the
Rotary Speaker treble horn sound. The bass rotor sound is not
affected by the Mic Pos selection but has a dedicated setting for
mono or stereo (Bass Wide) operation (see below).
BASS WIDE
This option changes the sound of the bass rotor from a single micro-
phone (mono) perspective to a dual microphone (stereo) configuration.
Press BASS WIDE (Shift+Mic Pos) to switch between the two options.
DRIVE TYPE
The DRIVE TYPE selector allows for changing the character of the Rotary
Speaker overdrive/distortion. The available options provide both different
character and amounts of distortion.
When Drive Type is turned Off, no overdrive is applied and the Drive
Amount knob is inactive.
The DRIVE AMOUNT knob controls the amount of overdrive.
DRIVE AND EXTERNAL ROTARY SPEAKERS
If using an external Rotary Speaker, connected to either the 11-pin or
High Level EXT. ROTARY SPEAKER connectors, you may still want to add
additional overdrive, from the Nord Organ 3. To achieve this, make sure
that the Rotary Speaker/Amp Sim section is turned ON, with no Amp
Sim model or Rotary Speaker selected. Select a Drive Type and use the
Drive Amount control to achieve the desired amount of distortion.
i The internal Rotary Speaker simulation is never applied to the
outgoing signal on the Ext. Rotary Speaker connections.
ROTOR SPEED
Switch between slow, stopped and fast
rotor speeds by pressing the SLOW,
STOP and FAST buttons respectively.
The bass rotor and treble horn
acceleration rates, i.e. the time it takes
to go from slow to fast and vice versa,
can be adjusted in the SOUND menu
(Shift+Live 3), read more on page 30.
STOP ANGLE
To have the speaker sound exactly the same every time the rotors stop,
activate STOP ANGLE by pressing Shift+Stop. A blinking LED indicates
that this mode is active.
Bekijk gratis de handleiding van Nord Organ 3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Organ 3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4761 MB |
