Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 47 van 291
NORD MODULAR G2 V1.4x 3. Working with the synth: Performances
Page 47
transpose the keyboard up or down, the Keyboard Morph range will extend beyond the set Morph limits,
in other words the Morph will still have effect outside the C1 to C6 range by using ‘extrapolation’.
A
DVANCED
EXAMPLE
: When a Constant module is connected to the direct Pitch input on an Oscillator
and the Constant module is assigned to the Keyboard Morph set to a range between -28 to +32 units
(knob positions 36 to 96), and the Keyboard Tracking on the Oscillator is set Off, the Oscillator will track
the keyboard accurately through the Morph on the Constant module. Now note that when you play
outside the C1-C6 range the Oscillator still keeps on tracking the keyboard.
A
WORD
ABOUT
THE
P
ITCH
S
TICK
M
ORPH
The lower (or start) limit of the Pitch Stick Morph range is the Pitch Stick neutral position, so the centre
position it is in when you don’t touch it. When moving the Pitch Stick to the right the Morph travels to
the upper or end limit of the Morph range. If you move the Pitch Stick to the left the Morph range will
be mirrored, so from the start limit to the mirrored value of the end limit. Imagine that the Pitch Stick
Morph is assigned to a Constant module with a range from +20 to +32 units. Moving the Pitch Stick to
the right will Morph from +20 to +32, but moving the Pitch Stick to the left will morph from +20 to
+8, as +8 is the mirror value of +32 when mirrored at +20.
PERFORMANCES
See also “Performances” on page 18.
Note that the edits and settings you make for each individual Patch in a Performance do not
affect the original Patch in any way. The Performance memory is completely separate from the
Patch memory. The Patches saved in a Performance are only copies of the Patches from the
Patch memory.
E
NTERING
P
ERFORMANCE
M
ODE
Enter Performance mode by pressing the
P
ERFORMANCE
M
ODE
button. The Performance
button
LED
will light up to indicate the synth is in
Performance mode.
E
XITING
P
ERFORMANCE
M
ODE
To exit Performance mode, press the P
ERF
M
ODE
button again. Now you return to the regular Patch
mode. You will note that the Patches that were loaded
before entering Performance will reload to the Slots.
See also “Switching between Patch and Performance modes” on page 28.
1:1
Welcome
OSC1------------|
Freq Fine
OSC2-------
-
Freq F
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
