Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 48 van 291
3. Working with the synth: Performances NORD MODULAR G2 V1.4x
Page 48
L
OAD
A
NEW
P
ERFORMANCE
FROM
THE
INTERNAL
MEMORY
First, be sure you’re in Performance Mode. Then, load
a new Performance into the Slots by first turning the
R
OTARY
D
IAL
to select the Performance. If you like
you can also switch between Banks by pressing the
U
P
/D
OWN
N
AVIGATOR
button. Then load the
selected Performance into the Slots by pressing the
P
ATCH
L
OAD
button. Now, you can try out other
Performances of the internal memory and edit
parameters as described above. To revert to “Patch
mode”, press the P
ERFORMANCE
button.
Note that selecting a new Performance changes a lot of parameters. This might possibly lead to
unexpected behavior, e.g. if a Performance contains self-running sequencer modules you might
hear a complete song starting to play.
C
REATING
A
P
ERFORMANCE
First of all you need to activate the Slots you plan to use for your Performance. Do this by holding S
HIFT
and pressing the S
LOT
buttons you want to include as described in “Layering Patches” on page 43.
S
ELECTING
P
ATCHES
FOR
THE
S
LOTS
To select Patches as base in a Performance, do like this:
1. In Performance Mode, hold down the desired
S
LOT
button (A in this example). The S
LOT
LED
flashes to indicate that it’s the active Slot. The
D
ISPLAY
shows the name of the Patch in Slot A (if
any).
2. Select a new Patch for the Slot by holding down
the S
LOT
A button and scrolling with the R
OTARY
D
IAL
. To switch between Patch Banks, hold down
the S
LOT
A button and use the U
P
/D
OWN
N
AV
-
IGATOR
buttons. Repeat the procedure for the other Slots.
Note! Do not press the Patch Load button during this operation. The Patch is automatically
loaded to the Slot as soon as you release the Slot button.
If you want to assign or deassign a Patch in an active Slot to be controlled by the keyboard (Keyboard
Assign), double-click the S
LOT
button you want to include/exclude. If you want to include an unused
Slot or deactivate an active Slot, Press S
HIFT
+S
LOT
button.
E
DITING
A
P
ERFORMANCE
This is done just as in Patch (non-Performance) mode as described in “Editing Patch Settings” on
page 34. To activate a Slot for editing, simply press the desired S
LOT
button. The
LED
below it flashes
to indicate it’s the currently active Slot.
Note that when you save the Performance you save edited copies of Patches within the
Performance. The original Patches (from the Patch memory) that you may have used as base for
A:EnvADSR1-----
-
Attack Deca
y
1:2
Scream synth
A:EnvADSR1-----
-
Attack Deca
y
2:9 Acoustic
CN Plucked
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
