Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 46 van 291
3. Working with the synth: Morph groups NORD MODULAR G2 V1.4x
Page 46
D
EASSIGN
PARAMETERS
FROM
A
M
ORPH
GROUP
1. Navigate to the morphed parameter you wish to deassign.
2. Press the M
ORPH
button. Then, hold the M
ORPH
GROUP
button. The parameters assigned to that
Morph group will indicate their morph ranges.
3. Turn the parameter K
NOB
you wish to deassign until it meets the initial (start) value. The
LED
graph
will go blank to indicate that the parameter has been deassigned from the Morph group.
To deassign all assigned parameters from a Morph group, hold down S
HIFT
and press the
corresponding M
ORPH
GROUP
button (Morph Clear).
E
DIT
PARAMETERS
IN
A
M
ORPH
GROUP
The Morph range will always start at the current position of the parameter. The relationship between the
setting of the parameter and the Morph range will be fixed, even if you move the setting of the parameter
after a Morph range has been set.
E
DIT
A
MORPHED
PARAMETER
WHICH
IS
ASSIGNED
TO
A
P
ARAMETER
P
AGE
Press the corresponding P
ARAMETER
P
AGE
button to display the desired morphed parameter.
You can edit the morph range (the size of the sector) by first pressing the M
ORPH
button and then
holding down the M
ORPH
GROUP
button and turning the morphed K
NOB
.
E
DIT
A
MORPHED
PARAMETER
WHICH
IS
NOT
ASSIGNED
TO
A
PANEL
K
NOB
Press the P
ATCH
button to enter Patch Edit Mode. Navigate to the parameter you wish to edit.
You can edit the morph range (the size of the sector) by first pressing the M
ORPH
button and then
holding down the M
ORPH
GROUP
button and turning the morphed K
NOB
.
C
OPY
A
M
ORPH
GROUP
FROM
ONE
SOURCE
TO
ANOTHER
The special Copy/Paste function can be used to copy an entire Morph Group with all its assigned
parameters from one Morph source to another. To copy and paste a Morph Group, do like this:
First, press the M
ORPH
button. Then, press and hold the F
OCUS
/C
OPY
button and while holding it,
press a M
ORPH
GROUP
button. Release all buttons. Press and hold S
HIFT
+F
OCUS
/C
OPY
(Paste) and
while holding them, press the new destination M
ORPH
G
ROUP
button. You can copy M
ORPHS
to
another V
ARIATION
by first selecting that V
ARIATION
before pasting.
M
ORPH
GROUPS
IN
SEPARATE
V
ARIATIONS
Each Variation in a Patch can have its own unique Morph group assignments.
C
OPY
M
ORPH
GROUPS
BETWEEN
V
ARIATIONS
All Morph groups in a Variation are automatically copied together with the rest of the parameter values
when you copy a Variation to another Variation as described on “Copy a Variation” on page 39.
A
WORD
ABOUT
THE
K
EYBOARD
M
ORPH
Keyboard Morph lets you control the Morphed parameters differently depending on where on the
keyboard you play. The minimum source value is the lowest key of the five octave Nord Modular G2X
keyboard when no Octave Shift is used, i.e. note C1, and maximum is the highest key, i.e C6. When you
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
