Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 32 van 291
3. Working with the synth: List of functions in the G2 System menu NORD MODULAR G2 V1.4x
Page 32
MIDI S
YS
E
X
ID |S
Y
Here you can set an ‘Instrument SysEx ID’. This is very useful if
you’re sending SysEx dumps of sounds from a sequencer to the
Nord Modular G2 and have several G2 synthesizers
MIDI
connected.
Let’s say you have two G2 synthesizers. These two instrument
models have the same ‘Manufacturer ID’ and ‘Model ID’ in the SysEx protocol. By defining separate
SysEx ID’s on each of the two synths, you will be able to “direct” the SysEx dumps from the sequencer
to one of the G2’s while the other one will ignore the dumps. Just make sure that you define a separate
SysEx ID before dumping the sounds to the sequencer. Select Instrument SysEx ID with the R
OTARY
D
IAL
. Range: 1-16, All. See also “G2 MIDI System Exclusive Specification” on page 148.
S
UST
P
ED
P
OL
|S
Y
Different sustain pedals use different polarity to activate the sustain
switch. Select between ‘Open’ and ‘Closed’ with the R
OTARY
D
IAL
.
C
TRL
P
ED
G
AIN
|S
Y
Different control/expression pedals have different characteristics.
Here you can select Gain to adjust the control pedal functionality of
the synth to your specific expression pedal. Select range (x1.00-x1.50)
with the R
OTARY
D
IAL
.
M
EMORY
P
ROT
|S
Y
Select memory protection for the entire internal Patch and
Performance memory. Select On or Off with the R
OTARY
D
IAL
.
K
EYBOARD
Z
ONE
|P
E
Here you can set individual note ranges for each of the Slots in a
Performance. Press desired S
LOT
button and set lower note limit
with the R
OTARY
D
IAL
. Press the R
IGHT
N
AVIGATOR
button and
set the highest note limit with the R
OTARY
D
IAL
. Then, repeat the
procedure for the other Slots by pressing the corresponding S
LOT
buttons. It’s also possible to have
overlapping keyboard zones. Note that these ranges are also affected by any Keyboard Split setting you
have in your Performance (see “Keyboard Split” on page 49). When you store your Performance, these
settings will be stored with it.
S
USTAIN
P
EDAL
O
N
/O
FF
|P
A
Select if you want the Sustain Pedal functionality on or off in the
Patch. If set to On, a connected sustain pedal will control both
sustain and any parameters assigned to the Switch Morph group.
Select On or Off with the R
OTARY
D
IAL
.
V
IBRATO
R
ATE
|P
A
Select Vibrato Rate for the Patch. Range: 4.00-8.00 Hz. (The Vibrato
Amount is set in the Patch Settings “menu” for the Patch. See
“Editing Patch Settings” on page 34).
S
YNTH
NAME
|S
Y
Here you can name your synth. Select characters with the R
OTARY
D
IAL
and change the “cursor” position with the left/right
N
AVIGATOR
buttons. Alternatively, press and hold the D
OWN
MIDI SysEx ID |Sy
1
6
Sust Ped Pol |Sy
Open
Ctrl Ped Gain |Sy
x1
.00
Memory Prot |Sy
O
ff
Keyboard Zone |Pe
C-1
- B3
Sustain Pedal |Pa
O
n
Vibrato Rate |Pa
6
.02 Hz
Synth Name |Sy
M
odularG2
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
