Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 30 van 291
3. Working with the synth: List of functions in the G2 System menu NORD MODULAR G2 V1.4x
Page 30
3. Performance parameters, which are unique for the currently active Performance (indicated in the
D
ISPLAY
by ‘|P
E
’ in the upper right corner)
Note that some Performance parameters are actually a group of parameters for the Slots used in the
Performance. The setting for each Slot can be different to that of the other Slots. Just like with the
Patch parameters, you can select a Slot by pressing its Slot button and them change the Performance
parameter for that particular Slot. But note that the settings for all the Slots used in the performance
are actually saved in the Performance and not in the individual Patches.
Select a function with the D
OWN
N
AVIGATOR
button.
LIST OF FUNCTIONS IN THE G2 SYSTEM MENU
M
ASTER
T
UNE
|S
Y
Use this function to transpose the keyboard in semitones and/or fine
tune the synth to other instruments or already recorded tracks. The
transposition range is from -6 to +6 semitones and is set with the
R
OTARY
D
IAL
.
Note that if you want to transpose up from A to Bes you just go one semitone up. If you would need to
transpose down from A to E you will have to go 5 semitones down, so the display shows ‘-5 semi’.
Transposing down from A to D is done by first transposing 5 semitones up and additionally set the
Global Octave Shift for the keyboard one octave down with the Octave Shift buttons. This results in a
total transposition of seven semitones down.
Fine adjustment ranges from -100 to +100 cents. 100 cents is one semitone. All Oscillator and Filter
modules that are set to track the keyboard are affected by the Master Tune function. Select the fine tuning
amount with the R
OTARY
D
IAL
.
MIDI L
OCAL
|S
Y
Turn the
MIDI
Local Control On or Off. Select Local On to be able
to control the synth from the internal keyboard and the pedals.
MIDI
data is also transmitted via the
MIDI
OUT
jack. In the Local Off mode,
the keyboard and pedal actions are transmitted only via
MIDI
and do
not play the synth itself.
Local Off is a function found on almost all
MIDI
synthesizers and is used with external
MIDI
sequencers.
Imagine that the
MIDI
OUT
jack of the synthesizer is routed back, via the external sequencer, to the
MIDI
IN
jack. Now imagine that you play a note on the keyboard to play a sound on the synth, and this note is
also send out through
MIDI
to the sequencer. If the sequencer ‘echoes’ this note back to the synth, the
note will be played a second time, now from the
MIDI
IN
jack, which in general does not sound good.
MIDI
Local Off will prevent this, as in this mode only the ‘echoed’ note will sound. This way you can also
be sure that the sequencer did actually receive the played note.
MIDI
sequencers do in general have a
setting named
ECHO
that will set if the sequencer will or will not retransmit the received notes back. So,
you will have to check the sequencer as well when making a change to this
MIDI
Local setting.
MIDI S
LOT
C
H
|S
Y
Set the
MIDI
channel for each S
LOT
(A-D). The set channels will be
used for receiving and transmitting
MIDI
data. If you select ‘Off’, the
Slot will not receive or transmit any
MIDI
data at all. Press desired
S
LOT
button and set
MIDI
channel with the R
OTARY
D
IAL
. Then,
Master Tune |Sy
0
semi 0 cent
MIDI Local |Sy
O
n
MIDI Slot Ch |Sy
1
234
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
