Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 29 van 291
NORD MODULAR G2 V1.4x 3. Working with the synth: Edit System Settings
Page 29
KB S
PLIT
M
ODE
/S
ET
S
PLIT
P
OINT
Lets you split the keyboard and play/control different Slots from different keyboard
zones. See “Keyboard Split” on page 49.
K
EYBOARD
S
PLIT
LEDS
Above the keyboard are four Keyboard Split
LED
s which
indicate current keyboard split position in Keyboard Split
mode (see “Keyboard Split” on page 49). These
LED
s only
light up if the Keyboard Split is set up through the KB Split
function on the front panel of the G2 Keyboard and G2X models. See also “Activate several Slots” on
page 43 and “Layering Patches” on page 43.
T
HE
S
HIFT
/C
LEAR
BUTTON
The S
HIFT
button is used to activate functions printed below some buttons on the front
panel. It’s also used for deleting entire Morph groups and for clearing Variations.
D
UMP
O
NE
Hold down S
HIFT
and press the S
YSTEM
button to send a
MIDI
SYSEX
dump of the Patch in the focused Slot, or of an entire
Performance in Performance Mode. Note that an average
MIDI
SYSEX
dump of a Patch is approximately 5 kB and that of a
Performance nearly 20 kB. This means the recording device - a
sequencer, for example - must be prepared for this amount of data.
It takes a
MIDI
cable about one second to transfer 3kB of data, so it might take up to seven seconds before
a Performance Dump is completed. See also “G2 MIDI System Exclusive Specification” on page 148.
D
UMP
CC (S
END
C
ONTROLLER
S
NAPSHOT
)
Hold down S
HIFT
and press the P
ATCH
button (D
UMP
CC) to
send the values of all
MIDI
CC# controllers used in the Patch in the
active Slot. See also “MIDI SendCtrl |Pa” on page 31, “MIDI
Controllers” on page 143 and “MIDI Automation” on page 144.
EDIT SYSTEM SETTINGS
Press the S
YSTEM
button to access the system parameters and
functions. The System menu is divided into three types of
parameters:
1. System parameters, which are global for the entire synth (indi-
cated in the D
ISPLAY
by ‘|S
Y
’ in the upper right corner).
Note that changing System parameters has an effect at the ‘top level’ of the synthesizer, meaning
that they will affect all Slots equally.
2. Patch parameters, which are unique for the currently focused Patch (indicated in the D
ISPLAY
by
‘|P
A
’ in the upper right corner)
Note that as changing a Patch parameter will only have an effect on the currently focused patch you
will have to first select the Patch you want to apply a change to with the Slot buttons. You can do
this by simply pressing the Slot button the Patch is in.
Sustain |Pa
On
ADSR-Env1
Attack Deca
y
Sustain |Pa
On
ADSR-Env1
Attack Deca
y
Sustain |Pa
On
ADSR-Env1
Attack Deca
y
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
