Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 28 van 291
3. Working with the synth: System Functions section NORD MODULAR G2 V1.4x
Page 28
D
ISPLAY
M
ODE
This button lets you switch between two different display modes for
the A
SSIGNABLE
D
ISPLAYS
. By default, the A
SSIGNABLE
D
ISPLAYS
show module names and parameter names. When you
turn an A
SSIGNABLE
K
NOB
or press an A
SSIGNABLE
B
UTTON
,
the parameter name is temporarily replaced by the parameter
value. In the other display mode, the parameter names and values
are constantly displayed. However, the module names are not
shown in this mode. Think of the Display having to show three
lines of text, where the display mode lets you choose to see either
lines 1 & 2 or see lines 2 & 3.
KB S
PLIT
M
ODE
Lets you split the keyboard and play/control Slots from a left hand and a right hand keyboard zone. The
two left most Slots A and B will be assigned to the left hand keyboard zone, while the two Slots C and
D will be assigned to the right hand keyboard zone. The split point can be altered by pressing the KB
S
PLIT
button while holding the S
HIFT
button. Repeating S
HIFT
/KB S
PLIT
will move the keyboard split
point. The
LED
s directly above the keyboard show the current split point.
It is possible to make more advanced keyboard split settings through the system menu, see “Keyboard
Split” on page 49 and “Keyboard Zone |Pe” on page 32.
S
UB
F
UNC
Hold S
HIFT
and press the D
ISPLAY
M
ODE
button to go into S
UB
F
UNC
mode and display the names
of button parameters instead of knob parameters in the A
SSIGNABLE
D
ISPLAYS
. This is useful when you
have assigned combined knob+button parameters to the A
SSIGNABLE
D
ISPLAYS
.
P
ERFORMANCE
M
ODE
In Performance mode you can create Keyboard Split/Layers configurations of up to 4
Slots. In Performance mode Pathes loaded to the four Slots can be saved and recalled
together as a single Performance (file). See “Performances” on page 47. When the
Performance button
LED
lights up it indicates the G2 is in Performance mode. If the
LED
is dimmed it indicates the G2 is in Patch mode.
S
WITCHING
BETWEEN
P
ATCH
AND
P
ERFORMANCE
MODES
Patch Mode and Performance Mode are completely separate modes, each with its own separate buffer
to hold the Patches loaded in all Slots for that mode. This means that when changing to Performance
mode, all Patches loaded in the four Slots in Patch Mode remain in their buffer. Switching back to Patch
Mode will automatically bring up those four original Patches from the Patch Mode buffer again. Note
that this ‘double buffering’ allows you to have up to eight Patches instantly standby, four Patches in
Performance mode and four Patches in Patch mode. Simply pressing the P
ERFORMANCE
button allows
you to switch between these two sets of up to four Patches.
C
OPYING
P
ATCHES
BETWEEN
P
ATCH
AND
P
ERFORMANCE
MODES
Holding the S
HIFT
button while pressing the P
ERFORMANCE
button will ‘transport’ a copy of the
Patches to the other mode. This will overwrite the temporary Patch buffers for the Patch and the
Performance modes. While in Patch mode, pressing S
HIFT
-P
ERFORMANCE
will transfer a set of up to
four Patches into a new Performance, which can then be stored as a Performance in the Performance
memory banks. While in Performance mode, pressing S
HIFT
-P
ERFORMANCE
will ‘separate’ the
Performance into individual Patches to be played or edited in Patch mode.
FltNord1--------|
Freq Res
Freq Res
622.5Hz 1.72
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
