Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 183 van 291
NORD MODULAR G2 V1.4x 13. Module reference: Oscillator group
Page 183
T
IPS
ON
CREATING
CYMBALS
SOUNDS
If this module is used to make a cymbal sound the combination of the Freq and Color knobs sets the
basic size and timbre of the cymbal. An extra envelope generator module will be needed to create the
cymbal sound. The shape and dynamics of the envelope that is applied to the metallic noise, plus perhaps
some additional filtering, may set where and how hard the cymbal is hit, e.g. on the edge or at the cup.
Note that the shape of the applied envelope is as important as the Freq and Color settings to create
convincing cymbal sounds.
Applying a random signal to the modulation inputs can create a lively modulated cymbal pattern. The
effect will sound the most convincing when the random value only changes on each new hit. In general
just a tiny amount of modulation depth on the Freq input is already enough. The random value can be
generated by a clocked random generator or by using a Sample&Hold module sampling a varying
waveform like a triangle wave. By using the Keyboard Velocity value the timbre of the cymbal sound can
be varied by the keyboard or from a
MIDI
sequencer program. The setting of the modulation amount
knobs can best be tweaked by ear to get the timbre variations to your own taste.
O
SC
N
OISE
The noise oscillator produces a narrow band of noise.
The bandwitdh can be só narrow that the noise will have
a distinct pitched character, sounding like a noisy sine
wave.
W
IDTH
The Width knob sets the bandwidth of the band of noise. By opening the Width
knob the noise can be tweaked between a lively fluctuating sine wave, through a noisy
whistle, to a wide band of noise. When the Width knob is fully opened the bandwidth
is about two octaves.
T
IPS
ON
USING
THE
NOISE
OSCILLATOR
The noise oscillator can be used in drawbar organ sounds, which are in general created by adding the
outputs of several sine wave oscillators tuned to the overtones of the basic pitches on the keyboard. By
replacing a few of the sine wave oscillators with noise oscillators a drawbar organ sound will get a lively
character, sounding more like a pipe organ where the narrow band of noise simulates the turbulence of
the stream of air in a pipe.
Note that by using the Partial tuning setting the oscillator can be easily tuned to the overtone of the basic
pitch of the key played on the keyboard. See also "Common Oscillator parameters”.
O
SC
M
ASTER
The Master Oscillator doesn’t generate any audio signal.
Instead, it generates a Pitch control signal which can be
used to control other Oscillator modules on their Pitch
inputs. The combination of the Master Oscillator with a
number of other Oscillators makes it possible to simultaneously tune all connected Oscillators from the
Master Oscillator instead of having to tune each individual connected Oscillator.
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
