Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 159 van 291
NORD MODULAR G2 V1.4x 13. Module reference: In/Out group
Page 159
Signal: Bipolar.
N
OTE
This blue output provides only the Note number value as a control signal, so without any additional pitch
bend or glide data. E4 (
MIDI
note 64), which is the middle E on the Nord Modular G2 keyboard when
the O
CT
SHIFT
selector is in the center position, represents an output signal level of 0 units.
MIDI
note
0 (C-1) represents -64 units and
MIDI
note 127 (G9) represents +63 units.
Signal: Bipolar.
G
ATE
This yellow output sends a logic
HIGH
signal (+64 units) every time a key is pressed on the keyboard, or
a MIDI note-on is received at the M
IDI
I
N
port. The logic signal switches back to a logic
LOW
signal (0
units) when the key is released. If a sustain pedal is activated, the logic signal will be
HIGH
for as long as
the pedal is pressed. Signal: Logic.
L
IN
& E
XP
V
ELOCITY
These blue outputs transmits the note-on velocity signals from the keys that you play on the Nord
Modular G2 or any velocity that is received on the M
IDI
I
N
port. The velocity response of the Nord
Modular G2 keyboard is linear on the Lin Vel output and exponential on the Exp Vel output. Signal:
Unipolar Positive.
R
ELEASE
V
ELOCITY
This blue output provides you with the release velocity signal from the keys that you play on the Nord
Modular G2, or any release velocity that is received via
MIDI
. The release velocity response of the Nord
Modular G2 keyboard is linear. Signal: Unipolar Positive.
M
ONO
K
EY
This module provides three different control signals to
emulate the keyboard behaviour of a classic
monophonic synth. The signals are generated from the
last/lowest/highest note (depending on the alternative below) played and affect all allocated voices, in
contrast to the Keyboard module described above.
L
AST
/L
O
/H
I
Select which notes should be output. ‘Last’ will output the data from the latest key played. ‘Lo’ will output
data from the lowest key played and ‘Hi’ from the highest key played.
Tips! The Lo and Hi alternatives are perfect for creating a polyphonic Patch with a separate sound for
the bass (Lo) or lead (Hi) lines. Patch the Pitch and Gate outputs (see below) to the bass/lead sound
oscillator(s) Pitch input and the Envelope Gate input. Disable the Oscillator KBT and Envelope KB
functions.
P
ITCH
This blue output provides you with a complete pitch (note number + any pitch bend and/or glide) signal
from the last/lowest/highest note (depending on the alternative above) played on the keyboard, or
received at the MIDI I
N
port.
E4 (MIDI note 64), which is the middle E on the Nord Modular G2 keyboard when the O
CT
SHIFT
selector is in the center position, represents a signal level of 0 units. MIDI note 0 (C-1) represents -64
units and MIDI note 127 (G9) represents +63 units.
Signal: Bipolar.
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
