Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 158 van 291
13. Module reference: In/Out group NORD MODULAR G2 V1.4x
Page 158
S
OURCE
SELECTOR
BUTTONS
Here you select the signal destination: Audio Out channels 1-4, FX Area channels 1-4 or audio Bus
channels 1-4. Note that it makes no sense to use the FX channels when the module is placed in the FX
Area. See also "Common In/Out module parameters and definitions”.
2-I
N
This module is used to route stereo signals from the
Audio Ins or the audio Buses.
S
OURCE
SELECTOR
BUTTONS
Here you select the signal source: Audio In channels 1/2 or 3/4 or audio Bus channels 1/2 or 3/4. See
also "Common In/Out module parameters and definitions”.
4-I
N
This module is used to route individual signals from the
Audio Ins or the audio Buses.
S
OURCE
SELECTOR
BUTTONS
Here you select the signal source: Audio In channels 1-4 or audio Bus channels 1-4. See also "Common
In/Out module parameters and definitions”.
FX-I
N
This module should be used when you want to route
audio signals from the Voice Area to the FX Area. Since
the FX In module processes the sum of all voices from
the Voice Area, the volume depends on the number of notes you play simultaneously. See an example of
how to use the Voice and FX Areas in “Voice Area and FX Area” on page 85. See also "Common In/
Out module parameters and definitions”.
K
EYBOARD
The Keyboard voice module gives you access to a few
basic and important signals associated with the keyboard
on Nord Modular G2, or a keyboard connected to the
synth via MIDI In. The signals are generated from each key played and affect one voice at a time.
P
ITCH
This blue output provides you with a pitch control signal that is a mix of the value for the played note
plus pitch bend plus glide values from the Nord Modular G2
KEYBOARD
or from the MIDI I
N
port.
This same signal is also hardwired internally in a patch to every module that has a KBT control or button.
The pitch bend value is scaled before it is combined with the note information. The pitch Bend Range
parameter controls the scaling amount, or in other words the sensitivity of the pitchstick. This ratio can
be set from the G2 frontpanel or in the Patch Settings menu, see “Patch Settings {Ctrl-P}” on page 118.
The note E4 (
MIDI
note 64), which is the middle E on the Nord Modular G2 keyboard when the O
CT
SHIFT
selector is in the center position, represents an output signal level of 0 units. Each half note up or
down on the keyboard will increase or decrease the value by one unit.
MIDI
note 0 (C-1) represents -64
units and
MIDI
note 127 (G9) represents +63 units.
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
