Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 144 van 291
12. midi implementation: MIDI Automation NORD MODULAR G2 V1.4x
Page 144
All
MIDI
CC
# in the range 0 - 119, except the ones listed above, are available for user to assign.
MIDI
CC
# 120 - 127 are not available for user to assign.
MIDI AUTOMATION
MIDI
automation means to let the G2 and another
MIDI
instrument control each other.
MIDI
automation
makes use of a special type of
MIDI
command, the
MIDI
Continuous Controller or
MIDI
CC
# command.
This command assumes that a unique identification number is assigned to every physical controller on
the equipment. This identification number is named the
CC
#, where the # character means 'number', so
CC
# can be read out full as 'Continuous Controller Number'. There are 127
CC
#'s available in each
MIDI
channel and there are sixteen
MIDI
channels on one cable, meaning that in theory some 2000 controllers
could be managed through one
MIDI
cable. In practice there are much less
MIDI
CC
#'s available, as in
general an instrument is in one single
MIDI
channel and often several
MIDI
CC
#'s are already used for
functions like switching to another bank of presets and loading sounds from that new bank. On the
average instrument some 80
MIDI
CC
#'s are available to be freely assigned by the user.
The values that a
MIDI
CC
# can send are whole numbers in the range between 0 and up to and including
127. This value is in essence associated with a knob position, the
MIDI
specification assuming that each
knob always has 128 positions. There are some standard
MIDI
CC
# assignments, like
MIDI
CC
#1 for a
Modwheel,
MIDI
CC
#2 for a breath controller and
MIDI
CC
#7 for the volume for the sound in the
particular
MIDI
channel. All
MIDI
equipment has to have these controllers assigned to these
MIDI
CC
#'s,
so a Modwheel will always work, no matter the brand of the equipment. But for the freely assignable
MIDI
CC
#'s it is the Wild West, and you can pretty much do what you like. Note that Pitchbend is not a
MIDI
CC
#, as it is handled by a dedicated pitchbend
MIDI
command.
The G2 editor tries to make assigning
MIDI
CC
#'s as light and easy as possible. There are a few functions
available that work together. These are the
MIDI
-
LEARN
function and the
ASSIGN
MIDI
,
CLEAR
MIDI
ASSIGNMENTS
and
VIEW
MIDI
functions in the Parameter Overview window. Additionally there is a
special
MIDI
Automate module that allows for
MIDI
talkback.
See also “Dump CC (Send Controller Snapshot)” on page 29 and “MIDI SendCtrl |Pa” on page 31.
17 Octave Shift
18 Keyboard Hold
19 Performance/Patch Mode Select.
(
MIDI
CC
# 19 is preassigned for Global
MIDI
channel only and is
available for user to assign on all other channels)
32 Bank Select LSB
64 Sustain Pedal
70 Sound Variation
80 G2
MASTERCLOCK
/
MIDI
CLOCK
Stop/Run
(
MIDI
CC
# 80 emulates the Stop/Run frontpanel button and is
preassigned for Global
MIDI
channel only. It is available for user to
assign on all other channels)
96 G2X Global Modwheel 1 (Morph Group 8)
97 G2X Global Modwheel 2 (Morph Group 5)
121 Reset All Controllers
123 All Notes Off
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
