Nord Lead 2 handleiding
Handleiding
Je bekijkt pagina 25 van 114
Programming Velocity Sensitivity Page 25
5. Programming Velocity
Sensitivity
The Filter Velocity Function
The quickest way to make a Program velocity sensitive, is to activate the Velocity function in the Filter
section. This makes the Filter Envelope Amount vary with striking force, to a pre-determined degree. See
page 46 for details.
Making Any Parameter Velocity Dependent
You can make any continuous parameter (those controlled with knobs) react to velocity. You can also
set the maximum and minimum boundaries for this, yourself.
Setting The Range
1. Set the parameter to the value you want it to deliver when you play with minimum force.
2. Press the Velocity/morph Assign button.
The LED over the button will flash, indicating that the Nord Lead 2 is in “Velocity Learn” mode.
3. Turn the knob to the value you want it to have at maximum striking force.
You can try out different settings for maximum velocity until you find the most suitable. While the Nord
Lead 2 is in “Velocity Learn” mode, you can set ranges for as many parameters as you wish.
4. Press the Velocity/Morph button again.
VELOCITY
Press this button to make the Filter Envelope Amount respond to velocity.
The LED indicates that the Velocity function is activated.
Bekijk gratis de handleiding van Nord Lead 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Lead 2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11965 MB |
