Nord Lead 2 handleiding
Handleiding
Je bekijkt pagina 24 van 114
Page 24 Editing Programs
Updating Cards used with the original Nord Lead
If you have a PCMCIA S-RAM card formatted with the first Nord Lead, you need to update the card to be
able to properly save settings for the new parameters, and to have the old sounds play back right on the
Nord Lead 2. The instrument can do this for you if your card has already been formatted or updated for
the Nord Lead software version 2.x. This was the software update for the original Nord Lead, that added
several parameters and features. If your card is formatted for the first software version of the Nord Lead,
see the section at the bottom of this page.
In the updating process below, Programs 1-11 in Bank 1 on the card will be erased! Therefore, we rec-
ommend that you first copy these Programs to other locations on the card, or save them in a sequencer
etc, by using System Exclusive data dump. After having updated the card, you can copy the sounds back
to locations 1-11 if you like.
The updating is done as follows:
1. Check that the card is not write protected.
2. Insert the card.
The display will flash with the letters “UP”.
3. To update the card, press Store.
If you have a card formatted for the first software version of the Nord Lead: In this case, the updating procedure
above will not work properly. It will allow you to use the card with the Nord Lead 2, but the old sounds
may sound different, with some parameters set to the wrong values. Therefore, we recommend that you
update your card to software version 2.x before updating it for use with Nord Lead 2. To do this, you
need to insert the unprotected card into a regular Nord Lead running software version 2.x. When the dis-
play flashes with the letters “UP”, press Store. Now the card is updated for software version 2.x, and can
be updated to Nord Lead 2 format.
Bekijk gratis de handleiding van Nord Lead 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Lead 2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11965 MB |
