Neewer QPRO-F handleiding
Handleiding
Je bekijkt pagina 6 van 20

EN
06
Wirelessly trigger an on-camera speedlite flash
There follows an example demonstrating the
use of the NEEWER Z2 flash with the trigger:
1. Turn off your camera first, then insert the
trigger into your camera's hotshoe, turn on
the trigger and then your camera.
2. Long press the <Zm/CH> button of the
trigger to set channel, group, mode and
apply other settings (please check the
"Trigger Settings" part of this manual for
detailed instructions).
3. Turn on the Z2 flash, press wireless setting button until the display shows wireless
symbol and the slave unit icon <RX>, then press the channel setting button <CH>
to set the flash on the same channel with the trigger. Next press the group setting
button <Gr> to set flash on the same group as that of the trigger. (Note: the
connection to other models of speedlite flash may differ. Please check their manuals
for reference.)
4. Press your camera shutter to trigger the Z2 flash, and the trigger's "Status Indicator"
will flash red.
How to Use the Trigger
Wirelessly trigger a Fujifilm
on-camera Speedlite flash
There follows an illustration to show how to connect an
EF-X500 flash with the trigger:
1. Turn off your camera first, then insert the Qpro-F
trigger into your camera's hotshoe. Turn on the
trigger and then your camera.
2. Long press the <Zm/CH> button of the Qpro-F
trigger to set channel, press <MENU> and choose
<ID> to set wireless ID of the trigger.
※ After ensuring that the on-camera flash's channels <CH> and wireless <ID> match
those of the QPRO-F trigger, the trigger can fire the flash.
28
-0.7
ZM/Fn GR CH/ID
TTL
CH:31
ID:99
OFF
RX
Bekijk gratis de handleiding van Neewer QPRO-F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Neewer |
Model | QPRO-F |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 1629 MB |