N8WERK 07532 handleiding
Handleiding
Je bekijkt pagina 17 van 56
17
EN
REMOTE CONTROL
The device can be controlled both via
the control panel (10) and via the remote
control (Picture E):
Speed = Fan Speed (19)
Silent / Auto = Mode (21)
Timer = Timer (20)
UV lamp = UV (22)
Anion = UV
Reset = Reset (23)
Power = Power (24)
CONTROL PANEL
Touch the relevant fi eld to activate or
deactivate the individual function.
When the control lamps on the control
panel (10) fl ash, this indicates which
functions are activated.
Fan speed (19)
Set the speed level
The fan of the device has four speed
levels. They can be set by touching the
Fan Speed fi eld several times. The level is
indicated by the respective control lamp.
On the highest level, all three fan control
lamps are lit.
Timer (20)
Activate / set / deactivate the timer
The device has three different timer
settings. You can programme them by
touching the Timer fi eld several times
(1h– 4h – 8h – Off). The setting is
indicated by the respective control lamp.
Mode (21)
Set mode
The device has two pre-programmed
modes: Auto and Silent. They can be set
by touching the Mode fi eld several times.
The selected mode is indicated by the
respective control lamp.
When Auto mode is active, the device
measures the particulate concentration via
the sensor (5) and automatically selects a
suitable speed. In Auto mode, the speed
level accordingly cannot be adjusted
manually.
When Silent mode is active, the brightness
of the lighting of the control panel (10)
and the LED indicator (1) and display (2) is
reduced. The fan runs at the lowest speed
level.
UV (22)
Activate / deactivate UV-C lamp
When this function is active, the UV-C
lamp(12) in the device is activated and
the air is also disinfected by the light.
The control lamp indicates whether the
function is activated or deactivated.
Reset (23)
Reset replace fi lter reminder
As soon as the fi lters reach the end of their
useful life, the Reset control lamp fl ashes.
Once the fi lters have been changed, touch
the Reset fi eld for around 5 seconds to
reset the replace fi lter reminder. The Reset
control lamp goes out
.
Power (24)
Switch the device on / off
Anion
Activate / deactivate ionizer
If this function is active, negatively charged
ions which bind dirt particles from the air
are released. To activate or deactivate the
function via the control panel (10), keep
touching the UVfi eld (22) until you hear a
beep.
07531_07532_07533_Inlay_DE-EN-FR-ES-IT_A5.indb 1707531_07532_07533_Inlay_DE-EN-FR-ES-IT_A5.indb 17 28.05.2021 10:04:1928.05.2021 10:04:19
Bekijk gratis de handleiding van N8WERK 07532, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | N8WERK |
| Model | 07532 |
| Categorie | Luchtreiniger |
| Taal | Nederlands |
| Grootte | 6800 MB |
