MSW -PTROW90 handleiding
Handleiding
Je bekijkt pagina 7 van 31
12 13
Rev. 27.06.2022
Rev. 27.06.2022
y) Never place feet on or inside the shields when
starting the engine.
z) The users must ensure that bystanders and/or nearby
objects are kept at a safe distance from the machine.
Untrained persons can not operate the machine.
aa) Do not use the machine in a dangerous environment.
bb) Secure all the machine components that are normally
lifted for servicing (e.g. blade grip).
cc) Do not lubricate or service the machine when it is
running.
dd) All parts must be correctly installed.
ee) When disposing of hazardous waste (e.g. engine
oil, fuel, lters) follow the procedures for hazardous
waste disposal.
) Make sure that there are no live electric cables, gas,
water or telecommunication lines which could be
damaged by vibrations in the area to be troweled /
smoothed.
gg) Caution: the space around the machine may be
dangerous, please protect unauthorized persons.
d) Keep the device in perfect technical condition.
Before each use check for general damage and
especially check for cracked parts or elements and
for any other conditions which may impact the safe
operation of the device. If damage is discovered,
hand over the device for repair before use.
e) Keep the device out of the reach of children.
f) Device repair or maintenance should be carried out
by qualied persons, only using original spare parts.
This will ensure safe use.
g) To ensure the operational integrity of the device, do
not remove factory-tted guards and do not loosen
any screws.
h) When transporting and handling the device between
the warehouse and the destination, observe the
occupational health and safety principles for manual
transport operations which apply in the country
where the device will be used.
i) Do not leave this appliance unattended while it is in
use.
j) Clean the device regularly to prevent stubborn grime
from accumulating.
k) The specied vibrations emission was measured
using standard measurement methods. Vibrations
emissions may change if the device is used in
dierent surroundings.
l) The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
m) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
n) Keep the device away from sources of re and heat.
o) During operation, the device generates vibrations
and requires repetitive activities that may be harmful
to user's hands and shoulders.
p) The user and the machine should be in a stable
position on level ground. Make sure that the machine
does not tip over, slip or fall during operation or
when left unattended.
q) Before using the device near excavation, make sure
that excavation walls are stable and will not collapse
under vibration.
r) Do not stand on the device, whether it is currently in
use or not.
s) Slipping, tripping or falling are the main causes
of serious injury or death. Be careful of uneven or
slippery working surfaces as well as unprotected
holes and excavations.
t) Always wear appropriate clothing when working with
this device. Protective clothing includes (but is not
limited to) boots, a long-sleeved shirt, long pants,
gloves, hearing protection and safety glasses.
u) Use proper techniques to lift heavy components. Do
not lift the machine by the guard basket of the trowel
assembly.
v) The throttle lever must be in the idle position when
the engine is being started.
w) Before starting the engine, make sure that the
working area is clean and all dangerous objects
are removed from it (e.g. protruding rod or wood).
Do not use the device in places where it seems
dangerous to work with it.
x) Before using the device, always test the safety
devices including the engine stopping mechanisms.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
3. USE GUIDELINES
The machine is designed for processing concrete slabs by
troweling / smoothing out by means of blades or a pan. The
machine is equipped with a combustion engine. This device
is not intended for indoor use.
The user is liable for any damage resulting from
unintended use of the device.
3.1. PREPARING FOR USE
ASSEMBLING THE DEVICE
1. Undo the 4 screws on the gear housing, connect the
handle tube and tighten the screws.
2. Unscrew the adjustment cable bolt from the
fastening pin, put the pin through the yoke, put the
cable bolt in and secure with the nuts.
3. Insert the lifting tube in the handle tube clamp.
2.3. PERSONAL SAFETY
a) Do not use the device when tired, ill or under the
inuence of alcohol, narcotics or medication which can
signicantly impair the ability to operate the device.
b) The machine may be operated by physically t
persons who are able to handle the machine, are
properly trained, who have reviewed this operating
manual and have received training in occupational
health and safety.
c) The machine is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience and/
or knowledge unless they are supervised by a person
responsible for their safety or they have received
instruction on how to operate the machine.
d) When working with the device, use common sense
and stay alert. Temporary loss of concentration while
using the device may lead to serious injuries.
e) Use personal protective equipment as required
for working with the device, specied in section 1
(Legend). The use of correct and approved personal
protective equipment reduces the risk of injury.
f) Do not overestimate your abilities. When using the
device, keep your balance and remain stable at all
times. This will ensure better control over the device
in unexpected situations.
g) Do not wear loose clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose
clothing, jewellery or long hair may get caught in
moving parts.
h) Remove all adjusting tools or spanners before turning
the device on. A tool or spanner left in the revolving
part of the device may cause injury.
i) Use eye, ear and respiratory protection.
j) The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a) Do not overload the device. Use the appropriate tools
for the given task. A correctly-selected device will
perform the task for which it was designed better and
in a safer manner.
b) Do not use the device if the ON/OFF switch does not
function properly (does not switch the device on and
o). Devices which cannot be switched on and o
using the ON/OFF switch are hazardous, should not
be operated and must be repaired.
c) When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
k) Misuse or careless use of the device may cause
serious injuries.
l) Before each cleaning, regulation, accessory change,
or if the device is not in use, turn the engine o and
completely cool the device.
m) Do not touch moving parts or accessories unless the
engine is turned o and left to cool.
n) Stay away from moving and rotating parts as they
may cause injury.
o) Do not use the machine if all protective covers are
not installed.
p) Do not increase the engine speed above 3500 rpm
without more a load. Any increase may result in
injury or damage to the device.
q) Do not touch the silencer or other hot elements
when the engine is hot it may cause serious burns.
r) Make sure that petrol is stored only in certied
containers (e.g. canister).
s) Do not refuel near sparks, ames or lit cigarettes.
t) Stop the engine before refuelling. Never refuel while
the engine is running or is still hot. Otherwise, spilled
or evaporated fuel may catch re from engine sparks
or silencer heat.
u) Do not overll fuel tank and avoid spilling petrol
while refuelling. Spilled petrol or petrol fumes may
catch re. If petrol has been spilled, make sure that
the area is dry before starting the engine.
v) After refuelling, make sure that the fuel tank cap is
properly screwed on.
w) Do not operate the engine or refuel petrol in
enclosed areas without appropriate ventilation.
x) Avoid operating the machine in enclosed spaces,
tunnels or other poorly ventilated places as the
exhaust fumes contain lethal/harmful fumes and
gases. If operating the machine in such conditions is
unavoidable, provide adequate exhaust extraction.
y) To transport: Stop the engine. Close and secure the
fuel tank cap. Switch the fuel valve to the “OFF-O”
position. Drain the fuel tank before long-distance
transportation or on bumpy roads.
z) Keep ammable materials (petrol, matches, straw,
etc.) away from the exhaust.
2.2. SAFETY IN THE WORKPLACE
a) Make sure the workplace is clean and well lit. A messy
or poorly lit workplace may lead to accidents. Try
to think ahead, observe what is going on and use
common sense when working with the device.
b) Do not use the device in a potentially explosive
environment, for example in the presence of
ammable liquids, gases or dust. The device
generates sparks which may ignite dust or fumes.
c) If you discover damage or irregular operation,
immediately switch the device o and report it to
a supervisor without delay.
d) If there are any doubts as to the correct operation
of the device, contact the manufacturer's support
service.
e) Only the manufacturer's service point may repair the
device. Do not attempt any repairs independently!
f) In case of re, use a powder or carbon dioxide
(CO
2
) re extinguisher (one intended for use on live
electrical devices) to put it out.
g) Children or unauthorised persons are forbidden to
enter a work station. (A distraction may result in loss
of control over the device).
h) Regularly inspect the condition of the safety labels. If
the labels are illegible, they must be replaced.
i) Please keep this manual available for future
reference. If this device is passed on to a third party,
the manual must be passed on with it.
j) Keep packaging elements and small assembly parts
in a place not available to children.
k) Keep the device away from children and animals.
l) If this device is used together with another
equipment, the remaining instructions for use shall
also be followed.
REMEMBER! When using the device, protect
children and other bystanders.
EN EN
Bekijk gratis de handleiding van MSW -PTROW90, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -PTROW90 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11004 MB |
