MSW -PASO D220 handleiding
Handleiding
Je bekijkt pagina 37 van 399
EN
four to five inches (10cm-13cm) may be best
On very short cartons, those less than 16 to 20 inches, only a one or two inches (3cm-
5cm) overlap may be necessary.
7.10 Applying tape to the carton
The best way to apply the tape to the carton is:
1. Place the wet tape on the end of one of the flaps to be sealed so that
Half of the tape's width is on one flap
The other half is overhanging
2. Fold the flap without the tape down to its closed position.
3. Fold the other carton flap ( the one with the overhanging tape) down into its proper closed
position so that the overhanging portion of the tape is now in contact with the other flap on the
opposite side of the carton.
4. Starting from the middle of the carton, apply a light downward pressure and wipe your hands
over the tape on top of the carton flaps. Move from the center to the sides and then down over
the overlapping ends in the ides of the carton. Sometimes wiping the tape down a second
time before releasing the carton is helpful.
This process will ensure:
Full adhesion of the adhesive.
A strong permanent bond.
A neat professional appearance of the sealed carton.
Note: It is not necessary to apply more than one piece of tape to any one seam being sealed.
Reinforced water-activated tape provides an extremely strong seal.
Bekijk gratis de handleiding van MSW -PASO D220, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -PASO D220 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 45247 MB |
