MSW -MH-680 handleiding
Handleiding
Je bekijkt pagina 11 van 129
EN
WARNING!
The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible
conditions and situations that may occur. It must be understood by the operator that common sense and
caution are factors that cannot be built into this product, but must be supplied by the operator.
DO NOT exceed rated capacity.
When the lift saddle is at its highest position, DO NOT attempt to pump the lift higher as this can damage
the mechanism.
Use this lift for lifting purposes only. DO NOT use it for any other purpose it is not designed to perform.
Keep children and unauthorized persons away from the work area.
Remove all loose-fitting clothing. Remove ties, watches, rings, and other loose jewellery, and contain long
hair.
Wear ANSI/CE-approved safety goggles when operating the lift.
Only use this lift on a surface that is stable, level, dry and not slippery, and capable of sustaining the load.
Keep the surface clean, tidy, and free from unrelated materials, and ensure that there is adequate lighting.
Always centre load on the lift saddle. When the lift saddle has been raised to the working height, ensure
the locking bar is engaged to prevent accidental lowering.
Always keep your hands and feet away from moving parts.
DO NOT attempt to transport a load on the lift. The lift must only be used in a static position for lifting and
lowering loads. Ensure that the load remains stable at all times.
DO NOT operate the lift when you are tired or under the influence of alcohol, drugs, or any intoxicating
medication.
DO NOT allow untrained persons to operate the lift.
DO NOT make any modifications to the lift.
DO NOT expose the lift to rain or any other kind of bad weather.
Cleaning and maintenance
1. Keep the lift clean and wipe off any oil or grease. Lubricate all moving parts.
2. When not in use, the lift must be stored in the lowest position in a dry location to minimize ram and
piston corrosion.
3. Before each use check all parts, ensure that all applicable bolts and nuts are firmly tightened. If any part
of the lift is damaged or suspect, remove the lift from service and take necessary action to repair it.
4. Periodically check the ram and piston for signs of corrosion. Clean exposed areas with a clean oiled cloth.
Bekijk gratis de handleiding van MSW -MH-680, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -MH-680 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 26682 MB |
