MSW -MH-680 handleiding
Handleiding
Je bekijkt pagina 12 van 129
EN
5. When lift efficiency drops, purge away air from the hydraulic system.
6. Check the hydraulic oil level. If not adequate, add hydraulic oil as necessary. DO NOT use brake fluid or
any other improper fluid.
7. If the lift needs repairing and/or any parts need to be replaced, have it repaired by authorized and trained
technicians and only use the replacement parts supplied by the manufacturer.
Troubleshooting
Problem Possible cause Solution
Can't lift load
1. Overload 1. Remove partial overload
2. Release valve not complete closed 2. Check the release valve
3. Air in hydraulic system
3. Purge air away, see the “Preparation”
section
Can't lift to full height
1. The oil is not enough 1. Add oil
2. Air in hydraulic system
2. Purge air away, see the “Preparation”
section
Oil leaking
1. Seals broken 1. Replace the seal kits
2. Screw parts loosed 2. Tighten the screw parts
Bekijk gratis de handleiding van MSW -MH-680, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -MH-680 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 26682 MB |
