MSW -CONCRETE-VPO750 handleiding
Handleiding
Je bekijkt pagina 19 van 264
EN
2.2. DIAMOND BLADE SAFETY
• Use appropriate steel centred diamond blades manufactured for use on concrete cutters.
• ALWAYS inspect diamond blades before each use. The blade should exhibit no cracks, dings,
or flaws in the steel centred core and / or rim. Centre(arbor) hole must be undamaged and
true.
• Examine blade flanges for damage, excessive wear and cleanliness before mounting blade.
• Blade should fit snugly on the shaft and against the inside / outside blade flanges.
• Ensure that the blade is marked with and operating speed greater than the blade shaft speed
of the cutter.
• Only cut the material that is specified by the diamond blade. Read the specifications of the
diamond blade to ensure the proper tool has been matched to the material being cut.
• ALWAYS keep blade guards in place. Exposure of the diamond blade must not exceed 180
degrees.
• Ensure that the diamond blade does not come into contact with ground or surface during
transportation.
• DO NOT drop the diamond blade on ground or surface.
• The engine governor is designed to permit maximum engine speed in a no-load condition.
Speeds that exceed this limit may cause the diamond blade to exceed the maximum safe
allowable speed.
• Ensure that the blade is mounted for proper operating direction.
2.3. CUTTER TRANSPORTATION SAFETY
• Use the lifting bail and appropriate lifting equipment to ensure the safe movement of the
cutter.
• NOT use the handlebars and /or front pointer as lifting points.
• NEVER tow the saw behind a vehicle.
• Ensure that both pointer bars are positioned appropriately to minimize their exposure during
transportation.
• Safeguard against extreme cutter attitudes relative to lever. Engine tipped to extreme angles
may cause oil to gravitate into the cylinder head making the engine difficult to start.
• NEVER transport the cutter with the blade mounted.
2.4. EMERGENCIES
• ALWAYS know the location of the nearest fire extinguisher and first aid kit. Know the
location of the nearest telephone. Also know the phone numbers of the nearest ambulance,
doctor and fire department. This information will be invaluable in the case of an emergency.
2.5. MAINTENANCE SAFETY
• NEVER lubricate components or attempt service on a running machine.
• ALWAYS allow the machine a proper amount of time to cool before servicing.
• Keep the machinery in running condition.
• Fix damage to the machine immediately and always replace broken parts.
• Dispose of hazardous waste properly. Examples of potentially hazardous waste are used
motor oil. Fuel and fuel filters.
• DO NOT use food or plastic containers to dispose of hazardous waste.
Bekijk gratis de handleiding van MSW -CONCRETE-VPO750, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -CONCRETE-VPO750 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 46743 MB |
