MSW -CONCRETE-VPO750 handleiding
Handleiding
Je bekijkt pagina 18 van 264
EN
• ALWAYS check the machine for loosened threads or bolts before starting.
• NEVER touch the hot exhaust manifold, muffler or cylinder. Allow these parts to cool before
servicing engine or saw.
• Allow the engine to cool before adding fuel or performing service and maintenance functions
Contact with hot components can cause serous bums.
• The engine section of this cutter requires an adequate free flow of cooling air.
• NEVER operate the cutter in any enclosed or narrow area where free flow of the air is
restricted. If the air flow is restricted it will cause serious damage to the saw or engine and
may cause injury to people. Remember the cutter’s engine gives off DEADLY carbon
monoxide gas.
• ALWAYS refuel in a well-ventilated area, away from sparks and open flames.
• ALWAYS use extreme caution when wording with flammable liquids. When refuelling, stop
the engine and allow it to cool.
• DO NOT smoke around or near the machine. Fire or explosion could result from fuel vapours,
or if fuel is spilled on a hot engine.
• NEVER operate the cutter in an explosive atmosphere or near combustible materials. An
explosion or fire could result causing severe bodily harm or even death.
• Topping-off to the fuel filler port is dangerous, as it tends to spill fuel.
• NEVER use fuel as a cleaning agent.
• ALWAYS read, understand, and follow procedures in operator’s Manual before attempting to
operate equipment.
• ALAWAYS be sure to operator is familiar with proper safety precautions. Stop the engine
when leaving the cutter unattended.
• Block the unit when leaving or when using on a slope.
• Maintain this equipment in a safe operating condition at all times.
• ALWAYS stop the engine before serving, adding fuel and oil.
• NEVER run engine without air filter. Severe engine damage may occur.
• ALWAYS service air cleaner frequently to prevent carburettor malfunction.
• ALWAYS store equipment properly when it is not being used. Equipment should be stored in
a clean, dry location out of the reach of children.
• NEVER operate this cutter in areas that contain combustible material or fumes and / or
explosions may result from errant sparks from the equipment.
WARNING:
DO NOT operate this equipment unless all guards and safety devices are attached and in place.
Caution must be exercised while servicing this equipment. Rotating and moving parts can cause
injury if contacted.
Keep all inexperienced and unauthorized people away from the equipment at all times. Unauthorized
equipment modifications will void all warranties.
Bekijk gratis de handleiding van MSW -CONCRETE-VPO750, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -CONCRETE-VPO750 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 46743 MB |
