Mooer Ocean Machine II handleiding
Handleiding
Je bekijkt pagina 24 van 29
21
x Rotate the Menu knob to select which parameter you want the expression pedal to control.
This will be a global setting and cannot be changed per preset.
x Press the Menu knob to confirm your selection. The selected Parameter will be highlighted in
red. (Note: P1 and P2 in are the two hidden parameters in the effect model, such as Dist and
Level for "Dist-Verb")
x Select the "Min Value" field at the bottom of this screen to change the minimum value in
percent that is applied to the effect when the expression pedal is in the heel down position.
Calibrate
When connecting an expression pedal for the first time or when you find that the pedal is not
working properly, it is recommended to calibrate the pedal. An expression pedal only needs to be
calibrated once. You only need to re-calibrate when you switch expression pedals.
Use this screen to calibrate the connected expression pedal. Follow the instructions on the screen.
For best results, use an expression pedal with a max potĞŶƚŝŽŵĞƚĞƌƌĞƐŝƐƚĂŶĐĞŽĨϭϬŬɏ- ϱϬŬɏ
Use a 1/4" TRS (stereo) cable to connect your expression pedal and your OMII.
To calibrate your pedal:
x Open the Calibrate screen in the OMII settings menu.
x Open your expression pedal all the way to the "heel down" position.
x Press Menu on the OMII to calibrate the minimum value.
x Close your expression pedal all the way to the "toe down" position.
x Press Menu on the OMII again to calibrate the maximum value.
This completes the calibration process. Press Home to return to the main screen.
Note: If an error is prompted during calibration, please check the following:
x The expression pedal is properly connected with a 3-wire TRS connecting cable and the cable
is not damaged.
x The value for the heel down position should always be smaller than the value for the toe
down position (the value in Step 1 should be smaller than Step 2).
IN & OUT
Use this screen to adjust the global input and output levels.
x Press the Menu knob to change between Input level (IN) and Output level (OUT).
x Rotate the Menu knob to adjust the level.
Bekijk gratis de handleiding van Mooer Ocean Machine II, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mooer |
| Model | Ocean Machine II |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6628 MB |
