Mobotix M73 handleiding
Handleiding
Je bekijkt pagina 52 van 87
Mounting
Connecting the camera
Connecting the camera
All connections to the camera (network, power supply, inputs/outputs) can be made on the cameras con-
nector box. No further accessories are required for this. A PoE switch provides the camera's power supply.
Connecting the Camera to the Network
There are two ways to connect the camera to the network - with the Connector Box RJ45 or with the
Connector Box LSA. A PoE switch provides the camera's power supply.
NOTE!
n
An EN54-4 certified power supply must be used.
n
The PoE switch must provide Class4 according to PoE Plus (802.3at-2009) as well as the 100/1000
Mbps Ethernet interface of the camera.
n
The maximum length of the network cable for remotely supplying power is 100m (300ft).
Fig. 7: Power supply using PoE switch according to PoE Plus (802.3at-2009).
Network connection with the Connector Box RJ45
1.
Remove the black plug from the left-hand opening
①
.
2.
Plug the supplied network cable M73 EN54: Scope of Delivery, p. 14 into the network connector
①
of the
connector box.
3. Connect the other wires/cables as required (inputs/outputs, USB).
52 / 87
Bekijk gratis de handleiding van Mobotix M73, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mobotix |
| Model | M73 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 22000 MB |
