Mobotix M73 handleiding
Handleiding
Je bekijkt pagina 44 van 87
Mounting
Mounting Options
Mounting to a Wall
Before mounting the camera, make sure that a network connection with power supply according to the PoE
Plus (802.3at-2009) standard is available at the mounting position (see Connecting the Camera to the Net-
work, p. 52).
NOTE! Download the drilling template from the MOBOTIX website: www.mobotix.com> Support > Down-
load Center > Marketing & Documentation> Drilling Templates.
CAUTION! Always print or copy the drilling template at 100% of the original size!
NOTE! Do not use the dowels if the installation surface is wood. Only use the screws to fasten the mounting
plate directly on the surface. In order to facilitate screwing in wood, the positions should first be pre-drilled
using a 2mm drill bit, for example (drilling depth just slightly less than screw length).
Preparing the Wall
1. Mark the holes for drilling using the drilling template (see Drilling Template, p. 11). When drilling, use a
suitable 8mm drill bit and drill holes with at least 60mm/1.2" depth.
2. Fully push the dowels Mounting Supplies: Scope of Delivery, p. 16 into the holes you drilled.
44 / 87
Bekijk gratis de handleiding van Mobotix M73, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mobotix |
| Model | M73 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 22000 MB |
