Mobotix M73 handleiding
Handleiding
Je bekijkt pagina 43 van 87
3. Using the supplied 5mm Allen wrench Mounting Supplies: Scope of Delivery, p. 16, tighten the bolt at the
back of the camera housing.
4. Push the rubber plug back into the opening of the screw to prevent humidity and dirt from
entering the camera.
Mounting Options
You can mount the MOBOTIX M73 EN54 to any even surface on a wall or to poles with up to 180mm/7.1" dia-
meter using the stainless steel pole mount that is available as accessory. The concealed cabling improves
security of the installation.
CAUTION! Installation only on flat surface! Unevenness must not exceed 0.5mm/0.02in!
Only use genuine MOBOTIX patch cables to guarantee the weatherproofness!
The mounting plate C.1 has been dimensioned to fully cover conventional flush-mounted sockets (without
frame) or cavity sockets.
NOTE! Before mounting the camera, determine its ideal position and make sure that the field of view is not
obstructed in any way. Once the camera has been mounted, you can fine-tune the image. If the monitored
area changes or the camera has to be installed in a different location, you can simply exchange the sensor
modules.
Tiltability when mounted
n
horizontally: 2 x 180 degrees
n
vertically: 110degrees
Mounting
Mounting Options
43 / 87
Bekijk gratis de handleiding van Mobotix M73, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mobotix |
| Model | M73 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 22000 MB |
