Mitsubishi MR-HS421EX handleiding
Handleiding
Je bekijkt pagina 19 van 24
19
Before use Operation Cleaning Troubleshooting
Other Issues
(Power Outages, When Not Using the Refrigerator
for a Long Time, To Move or Transport the Refrigerator)
Power Outages
Minimize the frequency of opening the doors, and avoid adding more food.
Operation panel settings other than the temperature settings may change. Check the settings. (Child Safety Lock, etc.)
Wash the water tank, water supply pipe, and before making ice for the first time, or if you have not made
ice for more than a week, Odors or dust may be adhering to the parts.
Notice
Remove the power plug.
Empty any water or ice from the water tank, and ice storage box and clean.
Wash the water tank, water supply pump, tank pipe, tank cap, lid, water supply pipe, ice storage box,
soundproof mat, and ice server, dry them completely, and then return them to their original positions.
Do not dispose of noise reduction mat.
Clean the interior of the refrigerator and open the doors for 2 to 3 days to dry the inside.
When Not Using the Refrigerator for a Long Time (When the Power Plug Is Unplugged)
* If the refrigerator is not dried sufficiently, it may cause mold, odors, or refrigerant (gas) leaks due to condenser corrosion.
Pages 13, 18
Check that is lit.
Set to the “STOP” ice making mode.
Page 13
Page 18
Page 7
Drainage port
Bottom handles
Handles on rear
upper side
Empty any water or ice from the water supply tank and
ice storage box.
Wear protective gear (gloves).
Remove the adjustable support cover, and then rotate and raise the
adjustable supports.
Remove the power plug.
Lay towels under the drainage port and the lower rear edge of the
refrigerator, and position a container or tray with a height of about
3 cm on the towels to collect the water.
* The towels prevent floor damage, and water from being spilled on the floor.
* Because the refrigerator is heavy, the work must be performed by at
least 2 people.
* The work must not be performed by small children or people
who are not capable of doing heavy work.
Ask a specialist transportation company.
Tilt the refrigerator slowly to the rear by about 30 degrees, and drain
the water from the evaporation tray via the drainage port on the lower
rear side. (The evaporation tray is not visible from the outside.)
2 or 4 persons should grasp the bottom handles and the handles on
rear upper side, and carry the refrigerator slowly.
To Transport the Refrigerator
Do not lay down the refrigerator on its side. (The compressor may
be damaged.)
Frost from the condenser inside the freezer compartment will melt, and may spill water when
the refrigerator is transported. It may take 1 day to defrost after unplugging the power plug.
When the Transportation Time Is Long, for Example When Moving House
Wear protective gear (gloves).
Remove the adjustable support cover, and then rotate and raise the adjustable supports.
¨
Page 7
Lay protective material under the casters and rear supports to prevent damaging the floor.
Move the refrigerator in the forward and backward directions.
* Moving in any direction other than forward and backward may damage the floor.
Please make sure to lay protective material such as a plate or board on the floor.
To Move the Refrigerator in Forward and Backward Directions
Do not damage the refrigerator's
refrigerant circuit (pipes).
Because flammable refrigerant is used,
this may result in fire or an explosion.
Prohibited
Wear protective gear when you
install the refrigerator.
Do not use any tools other than the
adjustable support tool kit.
Not following these instructions may result
in floor damage or injury.
Follow the
instructions
Bekijk gratis de handleiding van Mitsubishi MR-HS421EX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mitsubishi |
| Model | MR-HS421EX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4766 MB |
