Mitchell & Brown JB-32W1811 handleiding
Handleiding
Je bekijkt pagina 14 van 43
English - 13 -
Depending on the model of your TV and supplied
remote controls, an automatic pairing screen may
be displayed at this point. Follow the on-screen
instructions to pair your wireless remote control
(depends on the model of the remote control) with
your TV. Refer to the Remote Control section for more
information. If you want to pair your remote control
at a later time, highlight Setup Later and press OK.
On the next screen the Add Devices menu will be
displayed. You can connect external wireless audio
devices, remotes, keyboards, and mice to your TV.
For audio devices use the Pair Audio Link Device
option, for wireless remotes, keyboards, and mice
use the Pair Remote Control or Other Device
option. Highlight the option you prefer, press OK and
wait for the TV to complete device discovery. If you
select Pair Remote Control or Other Device option,
Press OK when you are ready. Available devices
will be listed. Highlight your device from the list and
press OK. Highlight Connect from the options menu
and press OK to complete the pairing process. You
can use the Discover option at the bottom to repeat
device discovery and connect other devices. Highlight
Continue and press OK to proceed. You can also use
the relevant options in the Settings>Devices menu to
add/remove devices later. Refer to the Connectivity
Next and press OK.
On next screen you can set broadcast types to be
searched, set your encrypted channel searching
and time zone (depending on the country selection)
preferences. Additionally you can set a broadcast
type as your favourite one. Priority will be given to the
selected broadcast type during the search process
and the channels of it will be listed on the top of the
Next and press
OK to continue.
About Selecting Broadcast Type
To turn a search option on for a broadcast type highlight
it and press the OK, Left or Right directional button. To
OK, Left or Right
directional button after moving the focus on the desired
broadcast type option.
Digital Aerial: If the D. Aerial broadcast search option
is turned on, the TV will search for digital terrestrial
broadcasts after other initial settings are completed.
After the initial settings are completed the TV will start
to search for available broadcasts of the selected
broadcast types.
While the search continues current scan results will be
displayed at the bottom of the screen. You can press
the TiVo, Back or Exit button to cancel the search.
The channels that have already been found will be
stored in the channel list.
Postcode Selection screen will be displayed after
the aerial channel search is completed. Enter your
postcode to receive your regional channels. Available
channels will be searched and installed. The channel
search will continue with other types of broadcasts
if any are selected in the broadcast type selection
screen.
Once the channel installation is complete, the Freely
TV-App installation steps will be displayed. In order to
access Freely services, this application needs to be
installed. Follow the steps to complete the installation.
For further requirements for Freely services refer to
the Freely Platform section. When you install the
application, the elements of the user interface such as
channel info banner and electronic programme guide,
which are normally provided by the TV, will be replaced
by this application.
While the search continues a dialogue may appear,
asking whether you want to sort channels according
to the LCN(*). Select Yes and press OK
(*) LCN is the Logical Channel Number system that organises
available broadcasts in accordance with a recognisable
channel number sequence (if available).
Note: Do not turn off the TV while performing first time
installation. Note that, some options may not be available
depending on the country selection.
Media Playback via USB Input
You can connect 2.5” and 3.5” inch (HDD with external power
supply) external hard disk drives or USB memory stick to your
TV by using the USB input(s) of the TV.
IMPORTANT!
before connecting them to the TV. Manufacturer will
Certain types of USB devices (e.g. MP3 Players)
or USB hard disk drives/memory sticks may not be
compatible with this TV. The TV supports FAT32 and
NTFS disk formatting.
Wait a little while before each plugging and unplugging
so may cause physical damage to the USB player
and the USB device itself. Do not pull out your drive
You can use USB hubs with your TV’s USB input(s).
External power supplied USB hubs are recommended
in such a case.
It is recommended to use the TV’s USB input(s)
directly, if you are going to connect a USB hard disk.
Note: When viewing media les the Media Browser menu
can only display a maximum of 1000 media les per folder.
Bekijk gratis de handleiding van Mitchell & Brown JB-32W1811, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mitchell & Brown |
| Model | JB-32W1811 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 5529 MB |
