Mitchell & Brown JB-32W1811 handleiding
Handleiding
Je bekijkt pagina 15 van 43
English - 14 -
Media Browser
You can play back audio and video les and display
image files stored on a USB storage device by
connecting it to your TV. Connect a USB storage device
to the USB input on the side of the TV.
After connecting a USB storage device to your TV a
message stating that the USB device is connected will
be displayed on the screen. You can access the content
of the connected USB device from the Sources menu
on the Home screen. You can also press the Source
button on the remote and then select your USB storage
device from the list of sources.
You can set your media browser preferences by
using the Settings menu. The Settings menu can
be accessed from the information bar displayed at
the bottom of the screen while a video or audio le is
being played or an image le is being displayed. Press
the Info button if the information bar has disappeared,
highlight the gear wheel symbol positioned on the right
side of the information bar and press OK. The Picture
Settings, Sound Settings, Media Browser Settings
and Options menus may be available depending on
the media le type and the model of your TV and its
features. The content of these menus may also vary
depending on the type of media le currently open.
Only the Sound Settings menu will be available while
playing back audio les.
Loop/Shue Mode Operation
Start playback and activate
All les in the list will be
continuously played in
original order
Start playback and activate
The same le will be
played continuously
(repeat)
Start playback and activate
All les in the list will be
played once in random
order
Start playback and activate
,
All les in the list will be
continuously played in
the same random order
To use the functions on the information bar highlight
the symbol of the function and press OK. To change
the status of a function, highlight the function icon and
press OK as many times as required. If the symbol is
marked with a red cross, that means it is deactivated.
FollowMe TV
With your mobile device you can stream the current
broadcast from your smart TV using the FollowMe
TV feature. Install the appropriate Smart Center
application to your mobile device. Start the application.
For further information on using this feature refer to
the instructions of the application you use.
Note: Depending on model, your TV may not support this
function. The application may not be compatible with all mobile
devices. Both of the devices must be connected to the same
network. This feature is only functional on TV source.
CEC
This function allows the user to control the CEC-
enabled devices, that are connected through HDMI
ports by using the remote control of the TV.
The CEC option in the Settings>Devices menu should
be set as Enabled at rst. Press the Source button
and select the HDMI input of the connected CEC
device from the Sources List menu. When a new
CEC source device is connected, it will be listed in
Sources List menu with its own name instead of the
connected HDMI port’s name (such as DVD Player,
Recorder 1, etc.).
The TV remote is automatically able to perform the
main functions after the connected HDMI source has
been selected. To terminate this operation and control
the TV via the remote again, press and hold the “0-
Zero” button on the remote control for 3 seconds.
You can disable the CEC functionality by setting the
related option under the Settings>Devices menu
accordingly.
The TV supports ARC (Audio Return Channel). This
feature is an audio link meant to replace other cables
between the TV and an audio system (A/V receiver or
speaker system).
When ARC is active, the TV will mute its other audio
outputs, except the headphone jack, automatically and
volume control buttons are directed to the connected
audio device. To activate ARC set the Sound Output
option in the Settings>Sound menu as HDMI ARC.
Note: ARC is supported only via the HDMI2 input.
System Audio Control
Allows an Audio Amplier/Receiver to be used with
the TV. The volume can be controlled using the re-
mote control of the TV. To activate this feature set the
Sound Output option in the Settings>Sound menu
as HDMI ARC. When HDMI ARC option is selected,
CEC option will be set as Enabled automatically, if it
is not already set. The TV speakers will be muted and
the sound of the watched source will be provided from
the connected sound system.
Note: The audio device should support System Audio Control
feature.
E-Manual
You can nd instructions for your TV’s features in the
E-Manual.
To access the E-Manual, enter the Settings>Sys-
tem>More menu, select Manuals and press OK. For
quick access press the Settings button and then the
Info button.
By using the directional buttons select a desired
topic and press OK to read instructions. To close the
E-Manual screen press the Back/Return, Exit or
TiVo button.
Note: Depending on model, your TV may not support this
function. The content of the E-Manual may vary according
to the model.
Bekijk gratis de handleiding van Mitchell & Brown JB-32W1811, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mitchell & Brown |
| Model | JB-32W1811 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 5529 MB |
