Mitchell & Brown JB-32W1811 handleiding
Handleiding
Je bekijkt pagina 13 van 43
English - 12 -
Switching On/O
To Switch the TV On
Connect the power cord to a power source such as a
wall socket (220-240V AC, 50 Hz).
To switch on the TV from standby mode either:
• Press the “ ” button, Programme +/- or a numeric
button, Guide button, Netix button or Freely button
on the remote control.
• Press the control button on the TV.
To Switch the TV O
• Press the “ ” button on the remote control.
• Press the control button on the TV, the function
options menu will be displayed. The focus will be on
the “ ” option. Press and hold the button for about
3 seconds to activate this option. The icon colour of
the option will change. Then press the button once
again, the TV will switch into standby mode.
To power down the TV completely, unplug the
power cord from the mains socket.
Note: When the TV is switched into standby mode, the standby
LED can blink to indicate that features such as Standby Mode
Search, Over Air Download or Timer is active. The LED can
also blink when you switch on the TV from standby mode.
First Time Installation
When turned on for the first time, the language
selection screen is displayed. Select the desired
language and press OK. In the following steps of
the installation guide, set your preferences using the
directional buttons and OK button.
After the language selection, you will be asked whether
you want to change accessibility settings. Highlight
Yes and press OK to change. Refer to the System
Menu Content section for detailed information on
available options.
Set your country preference on the next screen. You
will be asked to set and conrm a PIN at this point. You
have to enter it if you are asked to enter a PIN for any
menu operation later.
You can activate Store Mode in the next step. This
feature will congure your TV’s settings for store
environment and depending on the TV model, the
supported features of it may be displayed on the screen
as an info banner or the pre-installed video le may
be played back. This feature is intended only for store
use. It is recommended to select Home Mode for home
use. The Store Mode option will be available in the
Settings>System>More menu and your preference
for this setting can be changed later. Make your
selection and press OK to continue.
Depending on the model of your TV, the picture mode
selection screen may appear at this point. In order
for your TV to consume less energy and be more
environmentally friendly select Natural and press OK
to continue. If you select Dynamic and press OK, a
conrmation dialogue will be displayed. Select Yes and
press OK to proceed. You can change your selection
later using the Mode option in the Settings>Picture
menu.
Depending on the model of your TV and the country
selection Summary of Consent Settings screen may
appear at this point. Using the options on this screen
you can manage your consent settings. Highlight a
feature and press OK to enable or disable. Read the
relevant explanations displayed on the screen for
each highlighted feature before making any changes.
You can press the Right directional button to highlight
the text and use the Programme +/- or Up/Down
directional buttons to scroll up and down to read the
entire text. You will be able to change your preferences
at any time later from the Settings>Legal>Consent
Settings menu. If the Internet Connection option is
disabled the Network/Internet Settings step will be
skipped and not displayed. If you have any questions,
complaints or comments regarding the privacy policies
or their enforcement, please contact by email at
privacyrequest@xperi.com and smarttvsecurity@
vosshub.com. Highlight Submit Consent Choices
and press OK to continue.
On the next screen you need to agree to the terms and
conditions of TiVo Smart TV Service to make use of
the relevant services. Scroll the page to read the entire
text using the Programme +/- or Up/Down directional
buttons. Highlight Accept and press OK on the remote
to conrm and proceed. Highlight Cancel and press
OK to proceed without conrmation.
You will need to agree to the terms and conditions
of the Manufacturer next to make use of the relevant
services. Scroll the page to read the entire text using
the Programme +/- or Up/Down directional buttons.
Highlight Accept and press OK on the remote to
conrm and proceed. Highlight Cancel and press OK
to proceed without conrmation.
The Network/Internet Settings screen will be
displayed next. Please refer to the Connectivity
section if you need information on conguring a wired
or a wireless connection (availability depends on the
model) and other available options. If you want your
TV to consume less power in standby mode, you can
disable the Networked Standby Mode option for
the selected network type by setting it as O. After
the settings are completed highlight Next and press
OK button to continue. If the Network Type is set to
Wireless Device, available networks will be listed.
Highlight Next again when you are done and press
OK to continue. If you want to connect to a wireless
network at a later time, highlight Setup Later and
press OK.
Bekijk gratis de handleiding van Mitchell & Brown JB-32W1811, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mitchell & Brown |
| Model | JB-32W1811 |
| Categorie | Televisie |
| Taal | Nederlands |
| Grootte | 5529 MB |
